1、新建PANEL MODEL: BOE_VBO_DV430QUM_N10_UHD60，Panel\inc\PanelConfig.h里定义宏CONFIG_USER_BOE_VBO_DV430QUM_N10_UHD60

2、按键阈值根据ADC采样得到的最大最小值取平均来配置，同时调整ADC_Theshold_MAX和ADC_Theshold_MIN的范围，调整完后要用keil4编译生成.bin文件，在Prebuilds里替换原来的bin文件才生效
3、目前配置4个按键，第一个为menu键，第二个为down，第二个为up，第四个为确认/切换信号源
4、Panel\inc里面对应型号的.h文件，Htt、Vtt、frame_rate要按照规格书配置，clk_type = Htt_type x Vtt_type x frame_rate_type，VBO的需要乘以8。其他max和min值计算方法相同
5、调用Hv_Mw_OsdSetLogoBypass()函数，开机不显示logo

out/.config

@@ -5,7 +5,7 @@ export CONFIG_PRINT ?= yes
 export CONFIG_HARD_FLOAT ?= yes
 export CONFIG_USER_PANEL_RESOLUTION_TYPE ?= PANEL_RESOLUTION_TYPE_UHD
 export CONFIG_USER_PANEL_TYPE ?= PANEL_TYPE_VBOTX
-export dedededededeCONFIG_USER_PANEL_MODEL ?= INNO_VBO_M280DGJ_L30_UHD60
+export CONFIG_USER_PANEL_MODEL ?= BOE_VBO_DV430QUM_N10_UHD60
 export CONFIG_USER_PANEL_SEQUENCE ?= PANEL_SEQUENCE_OFF
 export CONFIG_USER_AMBLIGHT ?= AMBLIGHT_ON
 export CONFIG_USER_USB_OTA ?= USB_OTA_OFF
@@ -21,4 +21,4 @@ export CONFIG_USER_DISPCTRL_DITHER ?= DISPCTRL_DITHER_12_8_ON
 export CONFIG_USER_LED_DRIVER ?= LED_ON
 export CONFIG_VENDOR ?= hiview
 export CONFIG_PROJECT ?= ht7315_product_uhd
-export CONFIG_CODE_PATH ?= /root/MonitorSOC
+export CONFIG_CODE_PATH ?= /root/HT7315_MonitorSOC

out/.config.tmp

@@ -1,6 +1,6 @@
 CONFIG_USER_PANEL_RESOLUTION_TYPE ?= PANEL_RESOLUTION_TYPE_UHD
 CONFIG_USER_PANEL_TYPE ?= PANEL_TYPE_VBOTX
-dedededededeCONFIG_USER_PANEL_MODEL ?= INNO_VBO_M280DGJ_L30_UHD60
+CONFIG_USER_PANEL_MODEL ?= BOE_VBO_DV430QUM_N10_UHD60
 CONFIG_USER_PANEL_SEQUENCE ?= PANEL_SEQUENCE_OFF
 CONFIG_USER_AMBLIGHT ?= AMBLIGHT_ON
 CONFIG_USER_USB_OTA ?= USB_OTA_OFF

out/compressed/out/ddr-Monitor_SOC_compressed.bin-DB_size

@@ -1,2 +1,2 @@
 HIVIEW!
-882957
+882601

out/compressed/out/ddr-Monitor_SOC_compressed.bin_size

@@ -1,2 +1,2 @@
 HIVIEW!
-882957
+882601