/**
 * @file hv_drv_PLL.h
 * @brief PHY driver layer interface.
 * @verbatim
 * ==============================================================================
 *                        ##### How to use this driver #####
 * ==============================================================================
 * (+) Use Hv_Drv_PLL_SetAudioLaneClock(...) to Select the Audio Rx Reference Lane Clock.
 * (+) Use Hv_Drv_PLL_ConfigRxDpllSel(...) to Select the RX Dpll path.
 * (+) Use Hv_Drv_PLL_SetDisplayClock(...) to Configure the DPU Clock. 
 *
 * @endverbatim
 *
 * @author HiView SoC Software Team
 * @version 0.0.1
 * @date 2022-08-22
 */
#ifndef __SDK_DRIVER_PLL_H__
#define __SDK_DRIVER_PLL_H__

#include "hv_comm_DataType.h"
#include "hv_comm_Define.h"
#include "hv_drv_DpuCommon.h"
#include "hv_drv_Ktx.h"
#include "hv_cal_KtxCommon.h"

Status Hv_Drv_PLL_SetAudioLaneClock(LinkPortIndex enAudioRefPortIndex);

Status Hv_Drv_PLL_ConfigRxDpllSel(UINT32 uiRxPllIndex, LinkPortIndex enReleasePortIndex, LinkPortIndex enBindPortIndex);

Status Hv_Drv_PLL_ConfigRxDpllMuteSel(BOOL bSamePll);

Status Hv_Drv_PLL_SetRxdpllPixelClock(ChannelType enChannelCfg, UINT32* puiRxDclockOut, UINT32 uiRxClockDst);

/**
 * @brief 计算并生成 Display clock.
 * @param[in] uiDisplayDestClock RX D clock.
 * @param[out] *puiDClkCfg最终算出来的Display Clock unit Khz
 * @return 0: Success or other: Fail.
 */
Status Hv_Drv_PLL_SetDisplayClock(UINT32* puiDClkCfg, UINT32 uiDisplayDestClock,VideoConfigParams* pstVideoConfigParams);

/**
 * @brief 计算并生成 EDP的F0 - COMBOTX_PHY_0 所使用的参数.
 * @param[in] pstKtxInParam KTX输入参数.
 * @param[out] pstTxPllCfg 输出COMBOTX_PHY_0需要写入的参数
 * @return 0: Success or other: Fail.
 */
Status Hv_Drv_EdpTx_PllCalculator(const HvDrvKtxInParam *pstKtxInParam, HvKtxPllCfgParam *pstKtxPllCfgParam);

/**
 * @brief 计算并生成 VBO的F0 - COMBOTX_PHY_0 所使用的参数.
 * @param[in] pstKtxInParam KTX输入参数.
 * @param[out] pstTxPllCfg 输出COMBOTX_PHY_0需要写入的参数
 * @return 0: Success or other: Fail.
 */
Status Hv_Drv_VboTx_PllCalculator(const HvDrvKtxInParam *pstKtxInParam, HvDrvKtxDesign *pstKtxDesign, HvKtxPllCfgParam *pstKtxPllCfgParam);

Status Hv_Drv_VboTx_TaibaiPllCalculator(const HvDrvKtxInParam *pstKtxInParam, UINT32 uiPixClkFreq, HvKtxPllCfgParam *pstKtxPllCfgParam);

/**
 * @brief initialize sscg.
 */
VOID Hv_Drv_Sscg_Init(VOID);

/**
 * @brief set sscg enable.
 * @param[in] enType: vbo/edp/ddr.  bEnble: on/off
 */
VOID Hv_Drv_Sscg_Enalbe(SscgType enType, BOOL bEnble);

/**
 * @brief set sscg freq.
  * @param[in] enType: vbo/edp/ddr.  uiFreq: modulation frequency: 0-100(k)
 */
VOID Hv_Drv_Sscg_SetSscgFreq(SscgType enType, UCHAR8 ucFreq);

/**
 * @brief set sscg step.
  * @param[in] enType: vbo/edp/ddr.  uiFreq: modulation step: 0-30(0%-3%)
 */
VOID Hv_Drv_Sscg_SetSscgStep(SscgType enType, UCHAR8 ucStep);

/**
 * @brief set sscg spread.
  * @param[in] enType: vbo/edp/ddr.
  * @param[in] ucFreq: vbo/edp/ddr.  uiFreq: modulation frequency: 0-100(k)
  * @param[in] ucStep: vbo/edp/ddr.  uiFreq: modulation step: 0-20(0%-2%)
 */
VOID Hv_Drv_Sscg_SetSscg(SscgType enType, UCHAR8 ucStep, UCHAR8 ucFreq);

/**
 * @brief set sscg mode.
  * @param[in] enType: vbo/edp/ddr.  uiFreq: modulation ucMode: up/down/center
 */
VOID Hv_Drv_Sscg_SetSscgMode(SscgType enType, UCHAR8 ucMode);

/**
 * @brief initialize pll.
 */
VOID Hv_Drv_PLL_Init(VOID);

Status Hv_Drv_PLL_CheckRxDpllLock(UCHAR8 ucPortIndex);

Status Hv_Drv_PLL_CheckPtcdPllLock(VOID);

Status Hv_Drv_PLL_CheckSysPllLock(VOID);

Status Hv_Drv_PLL_CheckTxdPllLock(VOID);

Status Hv_Drv_PLL_CheckAudioPllLock(VOID);

Status Hv_Drv_PLL_CheckFNPllLock(VOID);

VOID Hv_Drv_PLL_ResetRxDpll(UCHAR8 ucPortIndex);

VOID Hv_Drv_PLL_ResetPtcdPll(VOID);

VOID Hv_Drv_PLL_ResetSysPll(VOID);

VOID Hv_Drv_PLL_ResetTxdPll(VOID);

VOID Hv_Drv_PLL_ResetFNPll(VOID);

VOID Hv_Drv_PLL_ResetAudioPll(VOID);

VOID Hv_Drv_PLL_SetPtcdpllSscgPlln(UINT32 uiPtcdFBDivInt, UINT32 uiPtcdFBDivFrac, UINT32 uiPtcdPostDiv);
#endif