/** * @file ProjectConfig.h * @brief Header file of Project. * * @verbatim * ============================================================================== * ##### How to use ##### * ============================================================================== * * @ endverbatim * * @author HiView SoC Software Team * @version 1.0.0 * @date 2022-08-26 */ #ifndef __DEVICE_HI_VIEW_HT7315_EVB_PROJECT_H__ #define __DEVICE_HI_VIEW_HT7315_EVB_PROJECT_H__ #define HV_CONFIG_ON 1 #define HV_CONFIG_OFF 0 /************************************************* Platform definiton *************************************************/ #define HV_PROJECT_CONFIG_MANUFACT_OUI 0x24DD1B #define HV_PROJECT_CONFIG_DEV_STRING0 0x00 #define HV_PROJECT_CONFIG_DEV_STRING1 0x00000000 #define HV_PROJECT_CONFIG_DEV_STRING2 0x00 #define HV_PROJECT_CONFIG_HW_MAJOR_REV 0x00 #define HV_PROJECT_CONFIG_HW_MINOR_REV 0x00 #define HV_PROJECT_CONFIG_FW_MAJOR_REV 0x00 #define HV_PROJECT_CONFIG_FW_MINOR_REV 0x00 #define HV_PROJECT_CONFIG_GUID0 0x00000000 #define HV_PROJECT_CONFIG_GUID1 0x00000000 #define HV_PROJECT_CONFIG_GUID2 0x00000000 #define HV_PROJECT_CONFIG_GUID3 0x00000000 /************************************************* Product function definiton *************************************************/ #define HV_PROJECT_CONFIG_DARK_STABILIZER HV_CONFIG_ON #define HV_PROJECT_CONFIG_MPRT HV_CONFIG_ON #define HV_PROJECT_CONFIG_FREESYNC HV_CONFIG_ON #define HV_PROJECT_CONFIG_ADAPTIVESYNC HV_CONFIG_ON #define HV_PROJECT_CONFIG_GSYNC HV_CONFIG_ON #define HV_PROJECT_CONFIG_LDR HV_CONFIG_ON #define HV_PROJECT_CONFIG_DCR HV_CONFIG_ON #define HV_PROJECT_CONFIG_EYESHIELD HV_CONFIG_ON #define HV_PROJECT_CONFIG_CROSSHAIR HV_CONFIG_ON #define HV_PROJECT_CONFIG_REFRESH_RATE HV_CONFIG_ON #define HV_PROJECT_CONFIG_HDR HV_CONFIG_ON #define HV_PROJECT_CONFIG_CUSTOM_KEY HV_CONFIG_ON #define HV_PROJECT_CONFIG_LIGHT_EFFECT HV_CONFIG_ON #define HV_PROJECT_CONFIG_VARIABLEBACKLIGHT HV_CONFIG_ON #define HV_PROJECT_CONFIG_CM HV_CONFIG_ON #define HV_PROJECT_CONFIG_AUDIO_SETTING HV_CONFIG_ON #define HV_PROJECT_CONFIG_MAIN_MONTAGE HV_CONFIG_OFF #ifdef CONFIG_USER_DOUBLE_CHANNEL_ON #define HV_PROJECT_CONFIG_MAGNIFY HV_CONFIG_ON #define HV_PROJECT_CONFIG_PXP HV_CONFIG_ON #else #define HV_PROJECT_CONFIG_MAGNIFY HV_CONFIG_OFF #define HV_PROJECT_CONFIG_PXP HV_CONFIG_OFF #endif /************************************************* INPUTPORT Option *************************************************/ #define HV_PROJECT_CONFIG_HDCP_KEY_ONROM HV_CONFIG_OFF /* 1: HDCP Key saved in ROM */ #define HV_PROJECT_CONFIG_HDCP_KEY_CLEAR_TEXT HV_CONFIG_OFF /* 0: cipher Text(����); 1: clear Text(����) */ #define HV_PROJECT_CONFIG_EDID_EXTER_EEPROM HV_CONFIG_OFF /* 1: USE Extern EEPROM to save EDID */ #define HV_PROJECT_CONFIG_EDID_UP_FCTWEEK HV_CONFIG_ON /* 1: Update the Factory Week */ #define HV_PROJECT_CONFIG_EDID_UP_FCTYEAR HV_CONFIG_ON /* 1: EDID Update the Factory Year */ #define HV_PROJECT_CONFIG_EDID_UP_SN_VENDOR HV_CONFIG_OFF /* 1: EDID Update the Factory SN on Vendor Info */ #define HV_PROJECT_CONFIG_EDID_UP_DESC_SN HV_CONFIG_OFF /* 1: EDID Update the Factory SN on Desc Info */ #define HV_PROJECT_CONFIG_ESEGMENT HV_CONFIG_ON /* 1: Support E-Segment */ #define HV_PROJECT_CONFIG_ESEGMENT_PM51 HV_CONFIG_OFF /* 1: Support E-Segment on 51 */ #define HV_PROJECT_CONFIG_FRL HV_CONFIG_ON /* 1: Support HDMI FRL */ #define HV_PROJECT_CONFIG_CTS HV_CONFIG_OFF /* 1: CTS specific handle */ #define HV_PROJECT_CONFIG_DEFAULT_EDID HV_CONFIG_ON /* 1: Default EDID exist*/ /************************************************* DPU Option *************************************************/ /*是否允许SUB通道和辅助通道公用相同的port*/ #define HV_PROJECT_CONFIG_CHANNEL_USE_SAME_PORT 0 /*是否开启完整LocalDimming*/ #define HV_PROJECT_CONFIG_FULL_LOCALDIMMING HV_CONFIG_OFF /*是否开启LocalDimming 2D PixelGain*/ #define HV_PROJECT_CONFIG_LDC_2D_PIXELGAIN HV_CONFIG_OFF /* 开启ldc需要配置kspi通道 */ #if (HV_PROJECT_CONFIG_FULL_LOCALDIMMING == HV_CONFIG_ON) #define HV_PROJECT_CONFIG_KSPI_CHANNEL_NUM 0x1 #endif /*是否使用bin文件进行PQ初始化*/ #define HV_PROJECT_CONFIG_PQ_INITBYBIN HV_CONFIG_ON /*PQ模块调试工具是否读写数据库，默认关闭，调试PQ打开*/ #define HV_PROJECT_CONFIG_PQ_DATABASEWREN HV_CONFIG_ON /* PQ模块关闭HDR是否切换EDID*/ #define HV_PROJECT_CONFIG_PQ_HDR_CHANGEEDID HV_CONFIG_OFF /*搜索端口的间隔时间，单位ms*/ #define HV_PROJECT_CONFIG_PERIOD_SEARCH_CHECK_SROUCE_TIMER 100 #define HV_PROJECT_CONFIG_CURRENT_PORT_SEARCHE_TIMES 90 /*当前通道搜索次数，一次HV_PROJECT_CONFIG_PERIOD_SEARCH_CHECK_SROUCE_TIMER毫秒*/ #define HV_PROJECT_CONFIG_EACH_PORT_DISCONNECT_SEARCHE_TIMES 20 /*通道未插线搜索次数，一次HV_PROJECT_CONFIG_PERIOD_SEARCH_CHECK_SROUCE_TIMER毫秒*/ #if (HV_PROJECT_CONFIG_CTS == HV_CONFIG_OFF) #define HV_PROJECT_CONFIG_NO_SIGNAL_CHECK_TIMES 10 /*无信号时进入待机前的检测信号的次数，每1秒检测一次*/ #define HV_PROJECT_CONFIG_EACH_PORT_SERARCH_MAX_TIMES 30 /*提示无信号前，每个插线通道搜索的次数,每100ms搜索一次*/ #else #define HV_PROJECT_CONFIG_NO_SIGNAL_CHECK_TIMES 200 #define HV_PROJECT_CONFIG_EACH_PORT_SERARCH_MAX_TIMES 100 #endif /*工厂模式下，加速进入老化模式*/ #define HV_PROJECT_CONFIG_BURN_IN_EACH_PORT_SEARCH_TIMES 10 #define HV_PROJECT_CONFIG_MAX_SEARCH_TIMERS_BURN_IN (HV_PROJECT_CONFIG_BURN_IN_EACH_PORT_SEARCH_TIMES * (HV_BOARD_CONFIG_MAX_HDMI_PORT_NUM + HV_BOARD_CONFIG_MAX_DP_PORT_NUM)) /*unit millisecond*/ /*total nosignal keep time = NO_SIGNAL_DURATION_TIMES * NO_SIGNAL_CHECK_TIMER_LENGTH */ #define HV_PROJECT_CONFIG_NO_SIGNAL_CHECK_TIMER_LENGTH 1000 #define HV_PROJECT_CONFIG_DPU_OVER_SCAN_SIDE_SIZE 0UL /*side image (250 is 2.5% of each side size) over screen, 0: off*/ #define HV_PROJECT_CONFIG_DPU_BRIGHT_FRAME HV_CONFIG_OFF #define HV_PROJECT_CONFIG_AUTO_POWER_OFF HV_CONFIG_OFF #define HV_PROJECT_CONFIG_MAGNIFY_SAMPLING_FLOW_POS HV_CONFIG_ON /*放大镜取样位置是否跟随放大镜显示位置（放大放大镜正下方画面）*/ #define HV_PROJECT_CONFIG_PIP_POS_PRECISE_ADJ HV_CONFIG_OFF /*PIP sub 位置是否开启精确调节，开启后h v位置可以步进调节*/ #define HV_PROJECT_CONFIG_CHANNEL_SEAMLESS_SWITCH HV_CONFIG_OFF /*双通道冻结一帧切换*/ #define HV_PROJECT_CONFIG_OVER_PANEL_CLOCK_EN HV_CONFIG_OFF #define HV_PROJECT_CONFIG_OVER_PANEL_CLOCK_UP 2000 /*over panel pixel clock KHz*/ #define HV_PROJECT_CONFIG_OVER_PANEL_CLOCK_DOWN 2000 /*reduce panel pixel clock KHz*/ /************************************************* PM51 Option *************************************************/ #define HV_PROJECT_CONFIG_PM51_UART_PRINT_ENABLE HV_CONFIG_ON #define HV_PROJECT_CONFIG_PM51_TYPEC0_ENABLE HV_CONFIG_ON /************************************************* DPMS Option *************************************************/ #define HV_PROJECT_CONFIG_DPMS_HDMI0_CABLE_ENABLE HV_CONFIG_ON #define HV_PROJECT_CONFIG_DPMS_HDMI1_CABLE_ENABLE HV_CONFIG_ON #define HV_PROJECT_CONFIG_DPMS_DP0_CABLE_ENABLE HV_CONFIG_OFF #define HV_PROJECT_CONFIG_DPMS_DP1_CABLE_ENABLE HV_CONFIG_ON #define HV_PROJECT_CONFIG_DPMS_DP0_AUX_ENABLE HV_CONFIG_OFF #define HV_PROJECT_CONFIG_DPMS_DP1_AUX_ENABLE HV_CONFIG_ON #define HV_PROJECT_CONFIG_DPMS_DP0_GPIO_ENABLE HV_CONFIG_OFF #define HV_PROJECT_CONFIG_DPMS_DP1_GPIO_ENABLE HV_CONFIG_ON #define HV_PROJECT_CONFIG_HDMI0_DDC_WAKEUP_ENABLE HV_CONFIG_OFF #define HV_PROJECT_CONFIG_HDMI1_DDC_WAKEUP_ENABLE HV_CONFIG_OFF #define HV_PROJECT_CONFIG_CABLE_WAKEUP_DOUBLE_ENABLE HV_CONFIG_OFF /************************************************* Audio Option *************************************************/ #define HV_PROJECT_CONFIG_VOLUME_CONSISTENT 1 #define HV_PROJECT_CONFIG_DIGITAL_MAX_VOLUME 256 /************************************************* Panel Option *************************************************/ #define HV_PROJECT_CONFIG_EDP_TX_TRAINING_TYPE HV_EDP_TX_FULL_LINK_TRAINING #define HV_PROJECT_CONFIG_EDP_TX_ASSR_EN HV_CONFIG_OFF #define HV_PROJECT_CONFIG_EDP_TX_AUX0_PORT EDP_AUX_PROT_INDEX0 #define HV_PROJECT_CONFIG_EDP_TX_AUX1_PORT EDP_AUX_PROT_INDEX1 #define HV_PROJECT_CONFIG_EDP_TX_HPD0_PORT EDP_HPD_PROT_INDEX0 #define HV_PROJECT_CONFIG_EDP_TX_HPD1_PORT EDP_HPD_PROT_INDEX1 #define HV_PROJECT_CONFIG_EDP_TX_HPD_IRQ_EN HV_CONFIG_OFF /************************************************* MPRT(PWM) Option *************************************************/ /* 通过原理图查看pinshare，选择合适的port输出波形 */ #define HV_PROJECT_CONFIG_MPRT_HIGHT_PORT 1 //GPIO11/PWM1/PIN92控制 #define HV_PROJECT_CONFIG_MPRT_HIGHT_POL 0 #define HV_PROJECT_CONFIG_BACKLIGHT_ENABLE 1 //背光开 #define HV_PROJECT_CONFIG_BACKLIGHT_DISABLE 0 //背光关 /* 输出固定高频PWM所需的固定参数，根据要设置的频率查表得到此值 */ #define HV_PROJECT_CONFIG_MPRT_HIGHT_FREQ_PWM_TOTAL 4304 #define HV_PROJECT_CONFIG_MPRT_HIGHT_FREQ_PWM_MULT 0 #define HV_PROJECT_CONFIG_MPRT_HIGHT_FREQ_PWM_DUTY 90 /* 通过原理图查看pinshare，选择合适的port输出波形 */ #define HV_PROJECT_CONFIG_MPRT_PORT 2 #define HV_PROJECT_CONFIG_MPRT_POL 0 /* 输出固定MPRT的PWM所需的固定参数 */ #define HV_PROJECT_CONFIG_MPRT_MODE 0 #define HV_PROJECT_CONFIG_MPRT_STA_VALUE 690 //普通MPRT模式下的拉高起始行，根据实际效果调节 #define HV_PROJECT_CONFIG_MPRT_VALUE 1440 #define HV_PROJECT_CONFIG_MPRT_VS_CLEAR 1 // VRR下MPRT开时，VS_CLEAR也要开，保证在帧结尾波形被拉低 #define HV_PROJECT_CONFIG_MPRT_VRR_STA_VALUE 19660 //65535的占比，起始行占htotal的比例，会根据上一帧自动计算，这里只设比例即可 #define HV_PROJECT_CONFIG_MPRT_VRR_VALUE 1440 // VRR下MPRT开时，VALUE按h total算，要保障拉行数足够大在帧结尾保持高电平 /* 设置供LDC使用的vsync接口,需要PWM的一个通道 */ #define HV_PROJECT_CONFIG_MPRT_LDCVSYNC_PORT 4 /************************************************* Factory Option *************************************************/ /* Factory Min*/ #define HV_PROJECT_CONFIG_FACTORY_PANEL_TIME_COUNT_PERIOD 30 /* Device Info Define*/ #define HV_PROJECT_CONFIG_FACTORY_MONITOR_MODE "HIVIEW 27G5F" #define HV_PROJECT_CONFIG_FACTORY_SCALER_MODE "HT7315" #define HV_PROJECT_CONFIG_FACTORY_FW_VERSION "000" #define HV_PROJECT_CONFIG_FACTORY_FW_CHANGE_DATE "20241209" #define HV_PROJECT_CONFIG_FACTORY_PANEL_TYPE "PANEL_EDP_QHD" #define HV_PROJECT_CONFIG_FACTORY_PANEL_SIZE "27.0" /* 8Bytes Max */ #define HV_PROJECT_CONFIG_HDMI_SCDC_DEVICE_STR "HiView" /*Color Filter Define */ #define HV_PROJECT_CONFIG_COLOR_FILTER HV_CONFIG_ON /*PQ Ambilight Define */ #define HV_PROJECT_CONFIG_AMBILIGHT HV_CONFIG_ON /*PQ Ambient Light Define */ #define HV_PROJECT_CONFIG_AMBIENT_LIGHT HV_CONFIG_OFF #define HV_PROJECT_CONFIG_PLATFORM HV_CONFIG_ON /*OTA Partition Define */ #define HV_PROJECT_CONFIG_DUAL_PARTITION HV_CONFIG_ON #endif