/*******************************************************************************
* @file	kmf_share_data.c
* @brief	This file discripe the kmf/bootrom share data default value.
* @note	Copyright (c) 2013 sunmedia Inc.
*		All rights reserved.
* @date	2014/01/15
********************************************************************************/
#include "drv_kmf_interface.h"
#include "subcustomer_setting.h"
/*
static BootRomShareData_t gKmfShareData =
{
	0, 		// UINT8	LcdBackLight;
	0,		// UINT8 	DisableKeypad;
	2,		// UINT8	PowerRestore;	0x62:auto power on, others: not support
	0,		// UINT8	SourceSelection;
	0, 		// UINT32	TVCannel;
	0,		// UINT8	CecTvAutoPwrOn;
#ifdef CONFIG_DEBUG_UART_MODE_EN	
	0,	// UINT8	UartATxBreak;
#else
	0x63,
#endif
	{0, },	// UINT8	Reserved[2];
	{0, },	// BootAlarm_t BootAlarm;
	{0,	},	// Backlight_t	LcdBacklightValue;
	DEFAULT_POWER_SHOW_LOGO,	// UINT8	HideBootLogo; 0x62: hide Logo, others: show Logo
	0,		// UINT8	LVDSEnable;
	{0, },	// UINT32	LVDSFormat[9];
	0,		// UINT8	PwmFreq;
	0,		// UINT8	DramSSCmode;
	0,		// UINT8	LVDSSSCmode;
};*/

static BootRomShareData_t gKmfShareData =
{
#ifndef CONFIG_DEBUG_UART_MODE_EN	
	.UartATxBreak = 0x63,
#endif
	.u8AgingMode = DEFAULT_AC_DELAY_SECONDS,
	.PowerRestore = DEFAULT_AC_AUTO_POWERON_STATUS,
	.LcdBacklightValue  = {DEFAULT_LCD_BACKLIGHT_VALUE,100},
	.HideBootLogo = DEFAULT_POWER_SHOW_LOGO, // UINT8	HideBootLogo; 0x62: hide Logo, others: show Logo
	#ifdef CONFIG_SUPPORT_SECOND_LOGO
	.HideBootSecondLogo = DEFAULT_POWER_SHOW_LOGO, // UINT8	HideBootSecondLogo; 0x62: hide Logo, others: show Logo
	#endif
	.DramSSCmode = DEFAULT_DRAMSSC_MODE,
	.LVDSSSCmode = DEFAULT_LVDSSSC_MODE,
	.DramSSC_188 = DEFAULT_DramSSC_188,
	.DramSSC_1a8 = DEFAULT_DramSSC_1a8,
	.DramSSC_Magic_Number = DEFAULT_DramSSC_Magic_Number,
    .TotalPanelSets = CONFIG_PANEL_NUM,
    .PanelIdx = 0,
    .ReadPanelInvert = 0,
    .PanelInvert = 0,
};