[2008-10-15 Hayes]
   1. Remove the initialization of EDID hardware because the BootRom would do it.

[2008-09-24 Hayes]
   1. Temporarily for HDMI switch CAT6353.

[2008-08-06 Hayes]
   1. Replace the memory allocation function with new one.

[2008-07-10-a Hayes]
   1. Fix using the wrong address for custimization data.

[2008-07-10 Hayes]
   1. Change the address and size of EDID data in flash.
   2. Remove loading EDID data. Bootrom would finish it.

[2008-04-14 Hayes]
   1. Correct EDID Data.

[2008-02-27 Hayes]
   1. Add customization feature.

[2008-02-05 Hayes]
   1. Support the write mode for slave0(HDMI1) and slave1(HDMI2).
   2. Change the reading of EDID from flash to memory.

[2008-01-04 Hayes]
   1. Support the write mode for slave2(VGA).

[2007-09-14 Hayes]
   1. Close the message for release version.

[2007-08-08 Hayes]
   1. Divide the flash data for HDMI1 and HDMI2.
   2. Adjust code for A1.

[2007-07-03 Hayes]
   1. Add feature to select eeprom or slave-EDID. The BOOTROM should be brv110k or later.

[2007-06-22 Hayes]
   1. Fix #229
      Add EDID data for VGA.
      VGA:	0xBF008800 ~ 0xBF0088FF
      HDMI:	0xBF008900 ~