2007.05.22 [Jack Chang] 1. Add functions for audio headphone to know plugin or plug out. (#define GPIO_ForAudio_ISR 1) 2007.05.24 [Jack Chang] 1. Modify function for sis516 VIP VSync frequency. 2007.05.29 [Jack Chang] 1. Export GPIOOpenDrainWriteFun. 2. Modify timer function for audio head phone plug in/out. 2007.06.05 [Jack Chang] 1. Change SiS516VSync_GPIO_Index from 14 to 0. 2007.07.17 1. Modify GPIOWriteFun(). To pull high/low first, then to set out-put mode. (Original is set out-put mode first, then to pull high/low). 2. Modify GPIOOpenDrainWriteFun(). To pull high/low first, then to set open-drain mode. (Original is set open-drain mode first, then to pull high/low). 3. Add sis516 HW timer0 functions. 2007.07.18 1. Add "#define GPIO_ForRebootTest 0" in gpio.h to support reboot test. The default is '0'. 2007.07.19 1. Add sis516 HW timer1 functions. 2007.07.26 1. Change timer function name for reboot test. 2007.07.27 1. Plug & play HDMI will cause system power off. Code for GPIO 17 to workaround the issue. 2007.08.13 1. Export functions for PWM LED1 & LED2. 2007.08.15 1. Add a reboot test option for TestV2 M/B or SI118 M/B. 2007.08.20 1. Add customize functions for PWM LED1 & LED2. 2007.08.21 1. Add CallBackEDQSFun() to monitor DRAM temperature while system is busy. 2007.08.23 1. For HW RD request to Modify CallBackEDQSFun(). To adjust EDQS value times from 4 to 6. 2007.08.30 1. To start CallBackEDQSFun() with Linux Kernel Timer function. 2007.09.21 1. Modify Timer0 Register function. So far, it can register 10 functions for Timer0. 2007.09.11 1. To modify set initial value for CallBackEDQSFun(). To work with BootRom R1.11.0d. 2007.09.29 1. Fix press continue power key will cause power key can't work. 2007.10.22 1. Modify power off function for reboot test. 2007.10.25 1. Add StartTimer0Flag & StopTimer0Flag functions. 2008.01.25 1. Add LED customization for Power Saving ON/OFF. 2008.02.12 1. Off Timer0 function Debug Print message. 2008.02.20 1. Update Led Duty frequency setting. 2008.02.25 1. Modify for DebugPrint method. 2008.02.27 1. Add PWM_LED_SetPolarityToOne() & PWM_LED_SetPolarityToZero() 2008.03.05 1. For HannStar: Set LED 1 polarity to 1. 2008.03.10 1. Kolin power off to delay 400ms.