menu "Modules Select" menu "Bootloader Select" menu "Bootloader OTA Upgrade Select" config SUPPORT_BOOTLOADER_SSU_UPGRADE bool "SUPPORT_BOOTLOADER_SSU_UPGRADE" default y help Define Bootloader SSU Upgrade config SUPPORT_BOOTLOADER_OAD_UPGRADE bool "SUPPORT_BOOTLOADER_OAD_UPGRADE" default y help Define Bootloader OAD Upgrade config SUPPORT_BOOTLOADER_OTA_UPGRADE bool default y if (SUPPORT_BOOTLOADER_SSU_UPGRADE || SUPPORT_BOOTLOADER_OAD_UPGRADE) endmenu # "bootloader Upgrade Select" config SUPPORT_CMD_WAKE_UP bool "Support Send UART Command Wake Up" default n help Send 'k' 'a' deviceID '01' to wake up system config SUPPORT_LOGO bool "Support Show logo" default y help Enable or Disable Show logo config SUPPORT_SECOND_LOGO bool "Support Show Second logo" depends on SUPPORT_LOGO default n help Enable or Disable Show Second logo config SUPPORT_MUTIPLE_LOGO bool "Support Mutiple logo" depends on SUPPORT_LOGO default n help Enable or Disable Mutiple logo config ENABLE_MUTIPLE_LOGO2 bool "Enable Logo2" depends on SUPPORT_MUTIPLE_LOGO default n help Enable or Disable Mutiple logo2 config MUTIPLE_LOGO2_FILENAME string "Logo2 file name" depends on ENABLE_MUTIPLE_LOGO2 default "n" help Logo2 filename config MUTIPLE_LOGO2_MAX_SIZE string "Logo2 max size" depends on ENABLE_MUTIPLE_LOGO2 default "n" help Logo2 module max size config ENABLE_MUTIPLE_LOGO3 bool "Enable Logo3" depends on SUPPORT_MUTIPLE_LOGO default n help Enable or Disable Mutiple logo3 config MUTIPLE_LOGO3_FILENAME string "Logo3 file name" depends on ENABLE_MUTIPLE_LOGO3 default "n" help Logo3 filename config MUTIPLE_LOGO3_MAX_SIZE string "Logo3 max size" depends on ENABLE_MUTIPLE_LOGO3 default "n" help Logo3 module max size config ENABLE_MUTIPLE_LOGO4 bool "Enable Logo4" depends on SUPPORT_MUTIPLE_LOGO default n help Enable or Disable Mutiple logo4 config MUTIPLE_LOGO4_FILENAME string "Logo4 file name" depends on ENABLE_MUTIPLE_LOGO4 default "n" help Logo4 filename config MUTIPLE_LOGO4_MAX_SIZE string "Logo4 max size" depends on ENABLE_MUTIPLE_LOGO4 default "n" help Logo4 module max size config LOGO_FULL depends on SUPPORT_LOGO bool "Logo full panel" default n help Enlarge jpeg logo to panel size config SUPPORT_CAPTURE_LOGO bool "Support Capture logo" default y help Enable or Disable Capture logo config CAPTURE_LOGO_MAX_SIZE string "Capture logo max size(unit:KB)" depends on SUPPORT_CAPTURE_LOGO default "n" help Capture logo module max size config SUPPORT_BOOT_MUSIC bool "Support Boot Music" default n help Enable or Disable Boot Music config BOOT_MUSIC_FILENAME string "Boot Music file name" depends on SUPPORT_BOOT_MUSIC default "n" help Logo4 filename config BOOT_MUSIC_MAX_SIZE string "Boot Music max size" depends on SUPPORT_BOOT_MUSIC default "n" help Boot Music module max size config SUPPORT_BOOT_MOVIE bool "Support Boot Movie" default n help Enable or Disable Boot Movie config BOOT_MOVIE_FILENAME string "Boot Movie file name" depends on SUPPORT_BOOT_MOVIE default "n" help Logo4 filename config BOOT_MOVIE_MAX_SIZE string "Boot Movie max size" depends on SUPPORT_BOOT_MOVIE default "n" help Boot Movie module max size config SUPPORT_BURN_MUSIC bool "Support Burn Music" default n help Enable or Disable Burn Music config BURN_MUSIC_FILENAME string "Burn Music file name" depends on SUPPORT_BURN_MUSIC default "n" help Music filename config BURN_MUSIC_MAX_SIZE string "Burn Music max size" depends on SUPPORT_BURN_MUSIC default "n" help Burn Music module max size config SUPPORT_BOOT_AGING_TEST bool "Support Boot Aging test" default n help Enable or Disable Boot Aging test. config STANDBY_LED_USE_PWM_CONTROL bool "Standby LED use pwm control" default n help Enable or Disable use pwm comtrol LED when standby. config AC_IN_8051_DELAY bool "AC ON delay in 8051" default n help Delay times to avoid AC power unstable bouncing�� config AC_IN_8051_DELAY_SECONDS int "AC ON delay seconds in 8051" depends on AC_IN_8051_DELAY default 2 help Delay 2 or 30 seconds to avoid AC power unstable bouncing �� config AC_SPECIAL_FILE_CHECK bool prompt "AC_Special file exist" default n config USB_TWO_WAY_SPECIAL_FILE_CHECK bool depends on AC_SPECIAL_FILE_CHECK prompt "Usb two way special file check" default n config SPECIAL_FILE_1 depends on AC_SPECIAL_FILE_CHECK string "SPECIAL_FILE_1" config SPECIALFILE1_CONTAINCHECK bool depends on AC_SPECIAL_FILE_CHECK prompt "SPECIALFILE1 CONTAINCHECK" default n config SPECIAL_FILE_2 depends on AC_SPECIAL_FILE_CHECK string "SPECIAL_FILE_2" config SUPPORT_IR_INI bool depends on AC_SPECIAL_FILE_CHECK prompt "SUPPORT_IR_INI" default n config HDMI_NOSIGNAL_POWEROFF_HDMI_WAKE_UP bool "Support HDMI no signal standby wake up by hpd 5v" default n config SUPPORT_ALL_HDMI_PORTS_WAKE_UP depends on HDMI_NOSIGNAL_POWEROFF_HDMI_WAKE_UP bool "Support all hdmi ports wake up" default n menu "What reference use for hdmi wake up?" depends on SUPPORT_ALL_HDMI_PORTS_WAKE_UP config USE_HDMI_EDID_COUNT_WAKE_UP bool "reference hdmi edid count for wake up " default n config USE_HDMI_CLK_DETECT_WAKE_UP bool "reference hdmi clock for wake up" default y endmenu config HDMI_SUPPORT_LEGACY_DVD_WAKE_UP depends on HDMI_NOSIGNAL_POWEROFF_HDMI_WAKE_UP bool "Support legacy source device wake up" default n menu "which port support legacy dvd wake up" depends on HDMI_SUPPORT_LEGACY_DVD_WAKE_UP config HDMI_PORT_A_SUPPORT_LEGACY_DVD_WAKE_UP bool "CONFIG_HDMI_PORT_A_SUPPORT_LEGACY_DVD_WAKE_UP" config HDMI_PORT_B_SUPPORT_LEGACY_DVD_WAKE_UP bool "CONFIG_HDMI_PORT_B_SUPPORT_LEGACY_DVD_WAKE_UP" config HDMI_PORT_C_SUPPORT_LEGACY_DVD_WAKE_UP bool "CONFIG_HDMI_PORT_C_SUPPORT_LEGACY_DVD_WAKE_UP" endmenu config SUPPORT_LOAD_KERNEL_FROM_USB bool "Support load kernel from usb at startup" default n config BOOTUP_WITH_EXTRA_ROOTFS bool "Bootup with extra rootfs" default n help This option can speed up the boot speed. when the system rootfs is too large, you can consider turning on this option. endmenu # Bootloader Select menu "Upgrade Select" config SUPPORT_USB_UPGRADE bool "SUPPORT_USB_UPGRADE" default y help Define USB Upgrade config SUPPORT_U2I_UPGRADE bool "SUPPORT_U2I_UPGRADE" default n help Define U2I Upgrade comment "BOOTROM" config CODE_INCOMPLETE_CHECK bool "CODE_INCOMPLETE_CHECK" default y help DO NOT USE WHEN ROMTER IS ENABLE choice prompt "AC Upgrade Options" optional config AC_PWRKEY_UPGRADE depends on SUPPORT_USB_UPGRADE bool "AC_PWRKEY_UPGRADE" config AC_AUTO_UPGRADE depends on SUPPORT_USB_UPGRADE bool "AC_AUTO_UPGRADE" endchoice choice prompt "Behavior after ac auto|pwrkey upgrade" bool default AC_AUTO_UPDATE_WAIT_ACOFF config AC_AUTO_UPDATE_WAIT_ACOFF depends on AC_AUTO_UPGRADE || AC_PWRKEY_UPGRADE bool "WAIT_ACOFF" config AC_AUTO_UPDATE_GOTO_STANDBY depends on AC_AUTO_UPGRADE || AC_PWRKEY_UPGRADE bool "GOTO_STANDBY" config AC_AUTO_UPDATE_DIRECT_BOOTUP depends on AC_AUTO_UPGRADE || AC_PWRKEY_UPGRADE bool "DIRECT_BOOTUP" endchoice config AC_AUTO_UPDATE_CLEAN_NVM depends on AC_AUTO_UPGRADE || AC_PWRKEY_UPGRADE bool "AC_AUTO_UPDATE_CLEAN_NVM" default y config PRELOAD_DB_FROM_USB bool "PRELOAD_DB_FROM_USB" default n help PRELOAD USER DATA BASE INTO FLASH FROM THE BIN FILE IN USB comment "KERNEL" config SUPPORT_USB_AUTO_UPGRADE depends on SUPPORT_USB_UPGRADE bool "SUPPORT_USB_AUTO_UPGRADE" default y help Define USB Auto Upgrade config CONFIRM_AUTO_UPGRADE depends on SUPPORT_USB_AUTO_UPGRADE bool "CONFIRM_AUTO_UPGRADE" default n help use pop menu to confirm if upgrade config UPGRADE_AND_GO_FACMODE bool "UPGRADE_AND_GO_FACMODE" default N help enter factory mode after upgrade config ENFORCE_UPGRADE depends on SUPPORT_USB_AUTO_UPGRADE bool "ENFORCE_UPGRADE" default n config HDCPKEY_PREFIX depends on SUPPORT_USB_UPGRADE string "HDCPkey BIN file Prefix" default "HDCPKey_" config HDCP2XKEY_PREFIX depends on SUPPORT_USB_UPGRADE string "HDCP2Xkey BIN file Prefix" default "HDCP2XKey_" endmenu # Upgrade Select menu "AUDIO SETTING" config SUPPORT_DOLBY_AUDIO bool "Support DOLBY Audio" default y choice prompt "DOLBY_REGION" default DOLBY_REGION_EU config DOLBY_REGION_EU bool "DOLBY_REGION_EU" config DOLBY_REGION_ATSC bool "DOLBY_REGION_ATSC" config DOLBY_REGION_OTHERS bool "DOLBY_REGION_OTHERS" help DOLBY LICENSE ISSUE endchoice config SUPPORT_AUDIO_CODEC_OVERLAY bool "Support AudioRom Load Codec (Codec Overlay)" default n if((CHIP_531||CHIP_506||CHIP_8501||CHIP_8503||CHIP_533)) config AUDIO_16_BIT_MEMORY bool "Support_AUDIO_OUTPUT_16_BIT_MODE" default n if((CHIP_531||CHIP_506||CHIP_8501||CHIP_8503||CHIP_533)) config AUDIOROMTYPE string #"AudioROM BIN NAME" default "AudioROM_6710_XBN.bin" if(!SUPPORT_DOLBY_AUDIO &&(CHIP_6710) && !SUPPORT_MONITOR) default "AudioROM_6710_Monitor_XBN.bin" if(!SUPPORT_DOLBY_AUDIO &&(CHIP_6710) && SUPPORT_MONITOR) config DAC_OFF_DELAY_TIME int "DAC POWER OFF TIME" default 2000 config AUDIO_FEATURE hex "Audio Feature(eg DOLBY:0x0000003f,UnDOLBY:0x00000029)" default 0x000000FF help type audio feature define for supported(Note. AudioRom also support these feature) defaut support MP3,AAC,REAL,WMASTD, VORBIS (0x000000AB) #define AUDIO_FEATURE_MP3 0x00000001 #define AUDIO_FEATURE_AAC 0x00000002 #define AUDIO_FEATURE_EAC3 0x00000004 #define AUDIO_FEATURE_REAL 0x00000008 #define AUDIO_FEATURE_AC3 0x00000010 #define AUDIO_FEATURE_WMASTD 0x00000020 #define AUDIO_FEATURE_WMAPRO 0x00000040 #define AUDIO_FEATURE_VORBIS 0x00000080 #define AUDIO_FEATURE_AMR 0x00000100 #define AUDIO_FEATURE_APE 0x00000200 #define AUDIO_FEATURE_FLAC 0x00000400 #define AUDIO_FEATURE_DTS 0x00004000 #define AUDIO_FEATURE_DRA 0x00008000 #define AUDIO_FEATURE_SRSTSHD 0x00010000 config AUDIO_MAXIMUS_SURROUND bool "Support Audio Maximus Surround" default n if(CHIP_531 || CHIP_506 || CHIP_8501) choice prompt "Select Licensed Audio Effect" default T1_AUDIO_EFFECT config SUPPORT_DBX bool "AUDIO_DBX_SURROUND" config SUPPORT_TITOI bool "AUDIO_TITOI_EFFECT" config SUPPORT_SRS_TSHD bool "AUDIO_SRS_TruSurroundHD(TSHD)" config T1_AUDIO_EFFECT bool "Use T1 Audio Effect" endchoice config SUPPORT_AUDIO_DESCRIPTION bool "Support Audio Description" default y config SUPPORT_HIGHLOW_PASS bool "Support High/Low Pass filter effect" default n config ALL_SOURCE_LINE_OUT #depends on CHIP_8503 bool "Enable LineOut All Source Audio" default n config SUPPORT_CHANGE_SPDIF_VOLUME bool "Support change spdif volume" default n config USE_AQ_BIN bool #"use aq.bin" default n help Select to use aq.bin config DDP48K_ARC_LOCK_PLL int "DDP48K ARC LOCK PLL" default 1 help FOR DOLBY 48K ,DECIDE HOW TO LOCK PLL DIVIDER 0 : NO LOCK PLL DIVIDER , ADJUST PTS OFFSET ANYTIME 1 : DEFAULT , ADJSUT PTS OFFSET AFTER RESET 1 SEC 2 : ADJUST PTS OFFSET AFTER RESET 2 SEC 3 : LOCK PLL DIVIDER ALL THE TIME endmenu menu "Language Font UI" config FONT_NAME string "Specify the font name" help Specify the font name config FONT_FOLDER string "Specify the font folder" help Specify the font folder menu "Unicode Trans Support" config SUPPORT_CHARSETDET bool "Support Match Character Set Codepage" default n config SUPPORT_ISO88591_CP28591 bool "Codepage ISO8859-1 Latin 1" default y config SUPPORT_ISO88592_CP28592 bool "Codepage ISO8859-2 Central European" default y config SUPPORT_ISO88593_CP28593 bool "Codepage ISO8859-3 Latin 3" default y config SUPPORT_ISO88594_CP28594 bool "Codepage ISO8859-4 Baltic" default y config SUPPORT_ISO88595_CP28595 bool "Codepage ISO8859-5 Cyrillic" default y config SUPPORT_ISO88596_CP8256 bool "Codepage ISO8859-6 Arabic" default y config SUPPORT_ISO88597_CP28597 bool "Codepage ISO8859-7 Greek" default y config SUPPORT_ISO88598_CP28598 bool "Codepage ISO8859-8 Hebrew" default y config SUPPORT_ISO88599_CP28599 bool "Codepage ISO8859-9 Turkish" default y config SUPPORT_ISO885910_CP285910 bool "Codepage ISO8859-10" default y config SUPPORT_ISO885911_CP285911 bool "Codepage ISO8859-11" default y config SUPPORT_ISO885913_CP285913 bool "Codepage ISO8859-13 Estonia" default y config SUPPORT_ISO885914_CP285914 bool "Codepage ISO8859-14" default y config SUPPORT_ISO885915_CP285915 bool "Codepage ISO8859-15 Latin 9" default y config SUPPORT_ISO885916_CP285916 bool "Codepage ISO8859-16" default y config SUPPORT_JAPANESE_CP932 bool "Codepage 932 Shift-JIS" default n config SUPPORT_KOREAN_CP949 bool "Codepage 949 Unified Hangul Code" default n config SUPPORT_SCHINESE_CP936 bool "Codepage 936 GB2312" default n config SUPPORT_TCHINESE_CP950 bool "Codepage 950 Big5" default n config SUPPORT_PERSIAN_CP8257 bool "Codepage 8257 Persian" default n endmenu config SUPPORT_OSDLANGUAGE_KOREAN bool "Support Korean Language" default n help for Korean Language Support config SUPPORT_SIMPLIFIED_CHINESE bool "Support Simplified Chinese" default n help for Simplified Chinese Language Support config SUPPORT_TRADITIONAL_CHINESE bool "Support Traditional Chinese" default n help for Traditional Chinese Language Support config FONT_ENGINE_HARFBUZZ bool "Use HarfBuzz font engine" default n help for Khmer Hindi Myanmar text config FLASH_STORE_TTF depends on FONT_ENGINE_HARFBUZZ bool "Use Flash store ttf" default n config RESOURCES_FOLDER string "Resources folder" depends on FLASH_STORE_TTF default "resources" help Resources folder name config FONT_MYANMAR depends on FONT_ENGINE_HARFBUZZ bool "Myanmar font" default n help Support Myanmar font config FONT_KHMER depends on FONT_ENGINE_HARFBUZZ bool "Khmer/Cambodian font" default n help Support Khmer/Cambodian font config FONT_ETHIOPIC depends on FONT_ENGINE_HARFBUZZ bool "Ethiopic font" default n help Support Ethiopic font config FONT_INDIA depends on FONT_ENGINE_HARFBUZZ bool "India font" default n help Support India font config FONT_INDIA_EXT depends on FONT_INDIA bool "India font extension" default n help Support Bengali/Gurmukhi/Gujarati/Tamil/Telugu font config SUPPORT_CHECK_STRING_SIZE bool prompt "Support Check String Length" default n config SUPPORT_FLIP_HORIZ bool "Support UI Flip horizontal" default n config OSD_RESIZE_FOR_PANEL bool "OSD Resize for Panel" default n help OSD Magnify Support config SUPPORT_HELP_MENU bool prompt "Support help menu" default y config SUPPORT_SHOW_KEYPADMENU bool "Support Show keypadmenu" default n config SUPPORT_NOSIGNAL_DISPLAY_PIC_INFILE bool "Support No Signal Show Pic" default n endmenu menu "Flash function option" config APPEND_NAME_TO_CIKEY_HDCPKEY bool "Append name to cikey and hdcpkey" default y help Append file name to cikey and hdcpkey file end config DISABLE_CIKEY_HDCPKEY_SPI_ENCRYPT bool "Disable cikey and hdcpkey do spi encrypt" default n help cikey and hdcpkey not do spi encrypt. config SUPPORT_FLASH_MODULE_CRC_CHECK bool "Support flash module crc check" default n help Add a crc info into flash head. endmenu menu "TT or CC or VCHIP Select" config SUPPORT_TTX bool "Teletext Support" default y select TTX_BYPASS_MODE help Select Teletext config TTX_SUBTITLE_REFER_CHAR_SET depends on SUPPORT_TTX bool "Subtitle Refer Character Sets" default n help TT Subtitle Refer Character Sets config SUPPORT_TTX_PAT depends on SUPPORT_TTX bool "Picture and Teletext Display Mode Support" default n help Select Picture and Teletext Display Mode config TTX_BYPASS_MODE depends on SUPPORT_TTX bool "TT BYPASS version" default y help SW collect TTX packet config TTX_COMPRESS_STORE depends on SUPPORT_TTX bool "TT Data compress" default n help TT Pagedata compress store choice depends on SUPPORT_TTX prompt "TT Level Select" default TT15_SUPPORT config TT25_SUPPORT bool "TT 2.5 Support" help Select TT 2.5 config TT15_SUPPORT bool "TT 1.5 Support" help Select TT 1.5 endchoice choice depends on SUPPORT_TTX prompt "TT font size select" default TTX_FONT_SIZE_30 config TTX_FONT_SIZE_10 bool "12 x 10" help Use font size: 12 x 10 config TTX_FONT_SIZE_30 bool "36 x 30" depends on TT15_SUPPORT help Use font size: 36 x 30 endchoice config SUPPORT_TTX_SIDEPANEL depends on SUPPORT_TTX && TT25_SUPPORT bool "TT Side Panel Support" default y help Select TT Side Panel config SUPPORT_ATS depends on SUPPORT_TTX bool "Support ATS" default y help Endable ATS config TTX_TARA_LOG depends on CC_SUPPORT || SUPPORT_TTX bool "Support Record VBI data (TARA format)" default n help Support record VBI data to /mnt/sda1/taralog.epr Start record: mon taralog End record: mon taralog Flush to USB: sync config CC_SUPPORT bool "CC Support" help Select Closed Caption choice depends on CC_SUPPORT || SUPPORT_TTX prompt "Select VBI data type for PAL_N" config PALN_SUPPORT_TT depends on SUPPORT_TTX bool "Support PAL_N TT" help Ambiguous specification on PAL_N, so this option is provided to customize as TeleText setting. config PALN_SUPPORT_CC depends on CC_SUPPORT bool "Support PAL_N CC" help Ambiguous specification on PAL_N, so this option is provided to customize as Closed Caption setting. endchoice config VCHIP_SUPPORT bool "VCHIP Support" help Select VChip endmenu menu "Merge Module" config EXTNDMODULE1 bool "ExtendModule1" config MERGENAME1 string "MERGENAME1(less than 12 bytes)" depends on EXTNDMODULE1 config MERGELOCATION1 string "MERGELOCATION1(aps/customer/customername/MERGELOCATION)" depends on EXTNDMODULE1 config EXTNDMODULE2 bool "ExtendModule2" config MERGENAME2 string "MERGENAME2(less than 12 bytes)" depends on EXTNDMODULE2 config MERGELOCATION2 string "MERGELOCATION2(aps/customer/customername/MERGELOCATION)" depends on EXTNDMODULE2 config EXTNDMODULE3 bool "ExtendModule3" config MERGENAME3 string "MERGENAME3(less than 12 bytes)" depends on EXTNDMODULE3 config MERGELOCATION3 string "MERGELOCATION3(aps/customer/customername/MERGELOCATION)" depends on EXTNDMODULE3 config EXTNDMODULE4 bool "ExtendModule4" config MERGENAME4 string "MERGENAME4(less than 12 bytes)" depends on EXTNDMODULE4 config MERGELOCATION4 string "MERGELOCATION4(aps/customer/customername/MERGELOCATION)" depends on EXTNDMODULE4 config EXTNDMODULE5 bool "ExtendModule5" config MERGENAME5 string "MERGENAME5(less than 12 bytes)" depends on EXTNDMODULE5 config MERGELOCATION5 string "MERGELOCATION5(aps/customer/customername/MERGELOCATION)" depends on EXTNDMODULE5 config EXTNDMODULE6 bool "ExtendModule6" config MERGENAME6 string "MERGENAME6(less than 12 bytes)" depends on EXTNDMODULE6 config MERGELOCATION6 string "MERGELOCATION6(aps/customer/customername/MERGELOCATION)" depends on EXTNDMODULE6 config EXTNDMODULE7 bool "ExtendModule7" config MERGENAME7 string "MERGENAME7(less than 12 bytes)" depends on EXTNDMODULE7 config MERGELOCATION7 string "MERGELOCATION7(aps/customer/customername/MERGELOCATION)" depends on EXTNDMODULE7 endmenu # merge Module config DCCM_SUPPORT depends on ATSC_SYSTEM bool "DCCM Support" default n help Select DCCM Support menu "VIP Configuration " config VIP_COLOR_FORMAT_Y8BIT bool "Support Vip Color Format Y 8bit" default n config ENABLE_MIR #depends on CHIP_533 || CHIP_531 || CHIP_305 || CHIP_506 || CHIP_8503 bool "Enable TVout" default n config SUPPORT_ASPECTRATIO_SETFULL_WITH_PANEL bool "Support Aspect Set Full With Panel" default n config FREERUN_MODE bool "Support FreeRun Mode" default n config SUPPORT_JPEG_ASPECT_RATIO bool "Support Jpeg Aspect Ratio" default n config MEDIA_ASPECTRATIO_AUTO_NATIVEENLARGE bool "Support Media Aspect Auto Mode NativeEnlarge" default n config SUPPORT_64BIT_LUT bool "Support 64Bit Lut" default n config FORCE_DISABLE_BYPASS_MODE bool "Force disable bypass mode" default n config DOT_TO_DOT_ADJUST bool "Support dot to dot adjust setting" default n config VIPTABLE_BIN_FLASH_MAX_SIZE string "Viptable.bin flash max size" default "25" config DYNAMIC_PANEL_CUT_OFFSET bool "Support dynamic panel cut offset by customer" default n config NATIVE_OVERPANEL_FULLSCREEN bool "Video show full screen when size over panel in native aspect" default n config FORCE_USE_1_FRAMEBUFFER bool "Let video force to use 1 framebuffer" default n config USE_DOWN_SCALE_IMPROVE bool "USE Down Scale Improve Module" default n config SAVE_BANDWIDTH_PRESCALING_DOWN bool "Use Prescaling Down to Save Bandwidth" default n endmenu menu "PQ Configuration " choice prompt "VCOLORLUT COLOR" default COLORLUT_7_COLOR config COLORLUT_14_COLOR bool "COLORLUT_14_COLOR" config COLORLUT_10_COLOR bool "COLORLUT_10_COLOR" config COLORLUT_7_COLOR bool "COLORLUT_7_COLOR" endchoice config FM_COLORLUT_RELATIVE_SWITCH bool prompt "FM_COLORLUT_RELATIVE_SWITCH" default n config FORCE_NR_EFFECT_ENHANCED_IN_OFF_OPTION bool "Enhance NR effect in OFF option" default y config CONTROL_TNRZ_BY_PQ_DRIVER bool "Control TNRZ map en by NR_Adjust function in PQ driver" default y config APPLY_DIFFERENT_SHARPNESS_SETTING_IN_PANEL_INVERT bool prompt "Apply different sharpness seting while panel invert" default n config CONTROL_WHITE_pattern_BY_PQ bool "Generate internal white pattern by PQ setting" default n config HDMI_RGB_RANGE_FORCE_AUTOMODE_TO_FULLRANGE bool "Force RGB Range in Auto Mode redirect to Full Range" default n config WHITE_BALANCE_ADJUST_IN_DPY_MATRIX bool "Adjust RGB gain in DPY matrix(Y) or Gamma(N)" default n config SUPPORT_SATURATION_PROTECT bool "Support Saturation Protect" default y config BANDWIDTH_LIMIT_WHEN_MENU_OPEN bool "bandwidth limit when menu open" default n config SUPPORT_NR_SETTIGN_BY_TOOL bool "Support NR Setting by tool" default y config SOYEA_AV_DITHERING bool "Additional AV dithering solution for SOYEA setop box." default n config SWITCH_GAMMA_TABLE_WITHOUT_RESET bool "Switch Gamma Table without disable/enable Gamma" default y endmenu menu "Panel Configuration " choice prompt "PanelSet Timing Mode" default SET_BY_FILE config PANEL_SET_BY_FILE bool "Set Value Base on PanelSetting" config PANEL_SET_BY_VTOTAL bool "Change Vaule Base on Vtotal" config PANEL_SET_BY_HTOTAL bool "Change Vaule Base on Htotal" config PANEL_SET_BY_CLOCK bool "Change Vaule Base on Clock" config PANEL_SET_VALUE_DIRECT bool "Set PanelSet Vaule Direct" config PANEL_SET_DIRECT_CLOCK bool "Set PanelSet Direct Clock" endchoice config DIRECT_PANEL_CLOCK_VALUE int "Set Direct Panel Clock Value" depends on PANEL_SET_DIRECT_CLOCK default 72920000 choice prompt "FrameLock Speed Select" default FRAMELOCK_NORMAL config FRAMELOCK_NORMAL bool "Normal" help FrameLock Normal Mode config FRAMELOCK_SLOW bool "Slow" help FrameLock Slow Mode config FRAMELOCK_CLOSE bool "Close" help FrameLock Close Mode endchoice config DISABLE_BACKLIGHT_GPIO_RECONTROL bool "Disable Backlight Gpio Control After Light on" default n config DISABLE_LVDS_CLOCK_CONTROL bool "Disable LVDS Clock After boot on" default n config ENABLE_PLL_DIV2 bool "Enable LVDS Pll Div2" default n config SUPPORT_SWITCH_PANEL_INDEX bool "Support Switch Panel Index By Hotkey" default n config LVDS_DATA_REF_BY_AP bool "Support panel lvds data reference by AP" default n config SUPPORT_PWMFrequency_SaveIn_FactoryMode bool "Support pwm frequency save in factory mode" default n help config nonlinear backlight curve config SUPPORT_PWM_DUTY_IN_DECIMAL bool "Support PWM Duty setting in decimal(thousand ratio)" default n help Increase the precision of PWM Duty setting, form integer to decimal config InputCurrent int prompt "CURRENT for BL" default 128 help input current value config SUPPORT_3D_EN bool "Enable 3D" default n config CHIP_PLL_SETTING_TEST bool "Chip LVDS PLL Setting Test" default n endmenu menu "UART Module Setting" config SUPPORT_UARTB bool "Support UartB" default n config XHDMICPIN_TO_UARTB bool depends on SUPPORT_UARTB prompt "HDMIC Pin As Uartb" default n config KEY1_I2S_SCK_TO_UARTB bool depends on SUPPORT_UARTB prompt "KEY1 I2S_SCK Pin As Uartb" default n menu "Bluetooth setting" depends on SUPPORT_UARTB config BLUETOOTH_SUPPORT bool depends on SUPPORT_UARTB prompt "Bluetooth Support" default n choice depends on BLUETOOTH_SUPPORT prompt "Bluetooth Version" default BT_5851S config BT_5851S bool "Bluetooth Module 5851S" config BT_AK105XT bool "Bluetooth Module AK105XT" config BT_RDA5856 bool "Bluetooth Module RDA5856" config BT_POL6556 bool "Bluetooth Module POL6556" endchoice config BLUETOOTH_FM_SUPPORT bool depends on BT_RDA5856 prompt "Bluetooth FM Support" default n config BLUETOOTH_UPGRADE_SUPPORT bool depends on BT_RDA5856 prompt "Bluetooth Upgrade Support" default n endmenu config STB_MODULE_SUPPORT depends on SUPPORT_UARTB bool "Support STB Module" default n config SMART_MODULE_SUPPORT depends on SUPPORT_UARTB bool "Support Smart Module" default n config VEHICLE_MODULE_SUPPORT depends on SUPPORT_UARTB bool "Support Vehicle Module" default n config SMART_MODULE_SET_SOURCE depends on SMART_MODULE_SUPPORT hex "Set Source" default 0x00003F help tv set source to android ATV/TV 0x1 YPbPr 0x2 AV 0x4 hdmi1 0x8 hdmi2 0x10 pc 0x20 DTV 0x40 scart 0x80 dvd 0x100 hdmi 0x200 game 0x400 AV1 0x800 AV2 0x1000 bluetooth 0x2000 scart1 0x4000 scart2 0x8000 YPbPr1 0x10000 YPbPr2 0x20000 SVideo 0x40000 SVideo1 0x80000 SVideo2 0x100000 SVideo3 0x200000 YPbPr3 0x400000 hdmi3 0x800000 endmenu #"UART Module" comment "TV Features Config" config SUPPORT_CEC_TV bool "Support CEC" default y config SUPPORT_HDMI_PLUGIN_CHANGE_SOURCE depends on !SUPPORT_CEC_TV bool "Support Hdmi Plugin Chage Source" default n config SUPPORT_ARC depends on SUPPORT_CEC_TV bool "Support ARC" default y config WAKE_UP_DEVICE_BY_POWER_ON_TV depends on SUPPORT_CEC_TV bool "Wake up device by power on tv" default y config SUPPORT_CEC_VOLUME_KEY_CONTINUE bool "Support CEC VOLUME KEY CONTINUE" default n config HDMI_SUPPORT_MHL bool "Support MHL" default y config MIFI_SUPPORT bool "Middleware file container support" help A small file container that support open, read, write, close, size... api. config LVDS_POWER_SAVING_SUPPORT bool "Support LVDS power saving" default y help Disable useless LVDS channel in 8 bit panel. This will also disable the GPIO that exist in LVDS. config SUPPORT_REMOVE_LDO bool "SUPPORT REMOVE LDO(Standby Power Saving)" default n config SUPPORT_NO_SIGNAL_STANDBY bool "Support NO Signal Enter Standby" default y config SUPPORT_VIPAP bool "Support VIP AP" default n config AutoAdjust_BlackScreen bool "AutoAdjust_BlackScreen" default n help config AutoAdjust_BlackScreen config SUPPORT_VOF_USE_N2 bool "Support VOF uses 2 buffers" default n config SUPPORT_PROJECT_ID bool "Support Project ID Switch" default n config SUPPORT_SYSTEM_BARCODE bool "Support BarCode" default n config SUPPORT_FACTORY_AUTO_TEST bool "Support factory auto test" default n config CTV_UART_FAC_MODE bool "Support CTV RS232 auto test" default n config TPV_UART_FAC_MODE bool "Support TPV RS232 auto test" default n config INN_UART_FAC_MODE bool "Support Inn RS232 auto test" default n config HK_UART_FAC_MODE bool "Support Hk RS232 auto test" default n config SUPPORT_PANNEL_PHOTO_TEST bool "Support Pannnel Photo test in factory P mode" default n config SUPPORT_ALL_ACTION_SHOW_BLUE_SCREEN bool "Support all action show blue screen" default n config SUPPORT_CHANGE_SOURCE_NOT_SHOW_BLUE_SCREEN depends on SUPPORT_ALL_ACTION_SHOW_BLUE_SCREEN bool "Support change source not show blue screen" default n config SUPPORT_ACTION_SHOW_BLUE_SCREEN_EXCEPT_MEDIA bool "Support all action show blue screen except media" default n config SUPPORT_SET_CLOCK_ONOFFTIME bool "Support set clock and system on off time" default n config SUPPORT_FACTORY_TEST_KEYPAD bool "Support Factory Test Keypad" default n config SUPPORT_ESTICKER_INFILE bool "Support Esticker In File" default n config SUPPORT_ESTICKER_NEW bool "Support Esticker new" depends on SUPPORT_ESTICKER_INFILE default n config SUPPORT_SPECIAL_PANEL_HAS_SHADOW bool "Support special panel has shadow if open LVDS data before BL ON" default n config SUPPORT_IR_FAC_REMOTE bool "Support Factory Remote use NEC" default n config SUPPORT_SYSTEM_LIFETIME bool "Support System Life Time" default n help a function config SUPPORT_SYSTEM_STANDBYTIME bool "Support System Standby-Mode Time" default n help record standby mode runtime config SUPPORT_KEYPAD_SHORT bool "Support Keypad key0 and key 1 short" default n config SUPPORT_BATTERY_DETECTION bool "Support Keypad ADC to detec battery" default n choice depends on SUPPORT_BATTERY_DETECTION prompt "Use Keypad ADC to detec battery" default SUPPORT_BATTERY_DETECTION_ADC0 config SUPPORT_BATTERY_DETECTION_ADC0 bool "Use ADC0" config SUPPORT_BATTERY_DETECTION_ADC1 bool "Use ADC1" config SUPPORT_BATTERY_DETECTION_ADC2 bool "Use ADC2" config SUPPORT_BATTERY_DETECTION_ADC3 bool "Use ADC3" endchoice config SUPPORT_SET_PANELSET_BY_BATTERY_AND_GPIO depends on SUPPORT_BATTERY_DETECTION bool "Support set panelset by battery & LED_G" default n config POWER_ON_TV_LOCK bool "support Power On TV Lock mode" default n config SUPPORT_SHOW_AVSPLUS bool "Support show avs plus in program info" default y config SUPPORT_LOOP_CHANGESOURCE_SOURCECLASS bool "Support loop change source in source class" default n config SUPPORT_DETECT_USBPLL bool "Support detect USB PLL(Only In Burnin Mode)" default n config SUPPORT_SD_HOTPLUG bool "Support hotplug SD card" default n config SUPPORT_RESET_BACKUP_FM_PICTUREMODE bool "Support reset backup fm picturemode" default n config SUPPORT_COPY_BW_TO_ALLSOURCE_RESET_BACKUP bool "Support copy WB to all source and reset backup" default n config SUPPORT_AUTO_IMPORTR_FM_PICTUREMODE bool "Support auto import fm picturemode" default n config SUPPORT_KEY_BOARD bool "Key Board" default n config SUPPORT_STORE_HDCP2X_TO_FLASH bool "store hdcp2x key to flash" default n config SUPPORT_MONITOR_SOURCE bool "Support monitor source" default n config PROJECTOR_ASPECT bool "Apply Zoom function to Aspectratio" default n config BLT_ASP_RATIO_MENU_ENABLE depends on PROJECTOR_ASPECT bool "Support osd projection zoom" default n config AUTO_WB bool prompt "Support Auto White Balance Data" default n config SUPPORT_AC_REPEAT_KEYPAD_POWERON bool "Support press long keypad power on" default n menu "What ac auto power on mode support wakeup?"" depends on SUPPORT_AC_REPEAT_KEYPAD_POWERON config AC_CONI_KP_PWON_AC_AUTO_ON bool "support ac auto mode on" default y config AC_CONI_KP_PWON_AC_AUTO_LAST bool "support ac auto mode last memory" default y config AC_CONI_KP_PWON_AC_AUTO_OFF bool "support ac auto mode off" default n endmenu endmenu # Modules select