UTS6710/aps/include/middleware/dtv/dtvpsimonitor/mid_psimon.h

/*! \addtogroup Monitors
 *  @{
 */
/******************************************************************************/
/**
 *
 * \file	mid_psimon.h
 *
 * \brief	middle-ware of digital TV PSI monitors.
 *
 * \note	Copyright (c) 2008 Sunplus Technology Co., Ltd. \n
 *			All rights reserved.
 *
 * \author	EMI integrated
 *
 ******************************************************************************/

#ifndef _MONITOR_H_2008_04_17
#define _MONITOR_H_2008_04_17

#include <types.h>
#include "mid_common.h"

#define MON_UNKNOWN		(-1)		// unknown
#define MON_ID_IGNORE	(-2)		// none monitored, ignore!
#define MON_ID_CUR		(-3)		// monitor current service

#define MON_LISTENER_ID_CODE_D4		0		// default id_code for monitor listenser

//definitions for PMT callback
// update bit for integration of all changes of PMT.
#define COMP_CHG_PCR			(1<<0) /* pcr pid change */
#define COMP_CHG_VID			(1<<1) /* Video stream pid change */
#define COMP_CHG_VID_CODEC		(1<<2) /* video stream type change */
#define COMP_CHG_VID_FOUND		(1<<3) /* found video stream */
#define COMP_CHG_AUD			(1<<4) /* audio1 stream pid change */
#define COMP_CHG_AUD2			(1<<5) /* audio2 stream pid change */
#define COMP_CHG_AD				(1<<6) /*  */
#define COMP_CHG_AUD_FOUND		(1<<7) /* found audio stream */
#define COMP_CHG_AUD_CODEC		(1<<8) /* audio1 stream type change */
#define COMP_CHG_AUD_CODEC2		(1<<9) /* audio2 stream type change */
#define COMP_CHG_OAD			(1<<10) /*OAD change*/
#ifdef SUPPORT_CA_SYSTEM
#define COMP_CHG_VID_ECM		(1<<11) /* video ecm change */
#define COMP_CHG_AUD_ECM		(1<<12) /* audio ecm change */
#endif
#define COMP_CHG_CA			(1<<15) /* CA change */
#define COMP_CHG_SUB_FOUND		(1<<16) /* found subtitle stream */
#define COMP_CHG_TTX_FOUND		(1<<17) /* found teletext stream */
#define COMP_CHG_CC_FOUND		(1<<18) /* found closecaption stream */
#define COMP_CHG_AUDIOLR	(1<<19)
#define COMP_CHG_AUDIOLR2	(1<<20)


typedef void (*iPsiMonPMTCallBack)(INT32 org_net_id, INT32 trans_id, UINT16 pmt_pid, void *data);
typedef void (*iPsiMonCallBack)(void *data);
#ifdef SUPPORT_INDEPENDENCE_DETECT_OTA
typedef INT32 (*iOtaMonCallBack)(void *data);
#endif
typedef bool (*iOtaMonONIDCallBack)(UINT16 CheckedONID);
typedef void (*iOtaMonExitCallBack)(void);
typedef void (*iOtaMonStateCallBack)(bool);

typedef struct t_otaComCallback 
{
#ifdef SUPPORT_INDEPENDENCE_DETECT_OTA
	iOtaMonCallBack  _pfMonDSICallbk;
#endif
	iOtaMonONIDCallBack _pfMonONIDCallb;
	iOtaMonExitCallBack _pfMonEXITCallb;
	iOtaMonStateCallBack _pfMonStateCallbk;
}OtaMonComCallback_t;
/**
 * 	\brief   Psi monitor callback structure
 */
typedef struct _mid_psimon_callbacks
{
	iPsiMonPMTCallBack	pfMonPMTCallbk; ///> for PMT monitor callback
	iPsiMonCallBack 	pfMonSDTCallbk; ///> for SDT monitor callback
	iPsiMonCallBack 	pfMonNITCallbk; ///> for NIT monitor callback
	iPsiMonCallBack 	pfMonTDTCallbk; ///> for TDT monitor callback
	iPsiMonCallBack 	pfMonTOTCallbk; ///> for TOT monitor callback
	iPsiMonCallBack 	pfMonCATCallbk; ///> for CAT monitor callback
	iPsiMonCallBack		pfMonPATCallbk;	///> for MHEG5 Deferred service searching
	iPsiMonCallBack 	pfMonSDTOtherCallbk; ///> for other SDT monitor callback
#ifdef CONFIG_SUPPORT_KDG_CERTIFICATION
	iPsiMonCallBack 	pfMonBATCallbk; ///> for BAT monitor callback
#endif	
#ifdef CONFIG_SUPPORT_INDONESIA_EWS
	iPsiMonCallBack		pfMonTxDWCallbk;	///> for TRDW/TCDW/TMDW monitor callback
#endif
#ifdef CONFIG_SUPPORT_HBBTV
	iPsiMonPMTCallBack		pfMonAITCallbk;
#endif
}Mid_PsiMonCallbks_t;


/*
 * Fuction declared here
 */
/** \addtogroup Add_monitor	Add Monitors
 *  \brief	add monitors for tables
 * @{ */
/******************************************************************************/
/**
 * \fn		INT32 AddNetworkMonitoringListener(INT32 original_network_id,
 *											   INT32 transport_stream_id,
 *											   INT32 id_code,
 *											   void (*callback)(void *))
 * \brief	Add NIT monitoring.
 *
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddNetworkMonitoringListener(INT32 original_network_id,
											INT32 transport_stream_id,
											INT32 id_code,
											void (*callback)(void *));

/******************************************************************************/
/**
 * \fn		INT32 AddNetworkMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *													INT32 original_network_id,
 *													INT32 transport_stream_id,
 *													INT32 id_code,
 *													void (*callback)(void *))
 * \brief	Add NIT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddNetworkMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 network_id,
					INT32 transport_stream_id,
					INT32 id_code, void (*callback) (void *));
#ifdef CONFIG_SUPPORT_INDONESIA_EWS
/******************************************************************************/
/**
 * \fn		INT32 AddTxDWMonitoringListener(INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add TxDW monitoring.
 *
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddTxDWMonitoringListener(INT32 id_code, void (*callback)(void *));

/******************************************************************************/
/**
 * \fn		INT32 AddTxDWMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,, INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add TxDW monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddTxDWMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code,
					void (*callback) (void *));
#endif

#ifdef CONFIG_SUPPORT_HBBTV
INT32 AddAITMonitoringListener(INT32 id_code, void (*callback) (INT32, INT32, UINT16, void *));

INT32 AddAITMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code,
					void (*callback) (INT32, INT32, UINT16, void *));
#endif

#ifdef CONFIG_SUPPORT_KDG_CERTIFICATION
/******************************************************************************/
/**
 * \fn		INT32 AddBouquetMonitoringListener(INT32 bouquet_id,
 *											   INT32 transport_stream_id,
 *											   INT32 id_code,
 *											   void (*callback)(void *))
 * \brief	Add BAT monitoring.
 *
 * \param	bouquet_id : bouquet identifier
 * \param	transport_stream_id : transport identifier
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddBouquetMonitoringListener(INT32 bouquet_id,
											INT32 transport_stream_id,
											INT32 id_code,
											void (*callback)(void *));

/******************************************************************************/
/**
 * \fn		INT32 AddBouquetMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *													INT32 bouquet_id,
 *													INT32 transport_stream_id,
 *													INT32 id_code,
 *													void (*callback)(void *))
 * \brief	Add BAT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	bouquet_id : bouquet identifier
 * \param	transport_stream_id : transport identifier
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddBouquetMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 bouquet_id,
					INT32 transport_stream_id,
					INT32 id_code, void (*callback) (void *));
#endif


/******************************************************************************/
/**
 * \fn		INT32 AddPMTServiceMonitoringListener(INT32 original_network_id,
 *												  INT32 transport_stream_id,
 *												  INT32 service_id,
 *												  INT32 id_code,
 *												  void (*callback)(INT32, INT32 , void *))
 * \brief	Add PMT monitoring.
 *
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddPMTServiceMonitoringListener(INT32 original_network_id,
												INT32 transport_stream_id,
												INT32 service_id,
												INT32 id_code,
												void (*callback)(INT32, INT32 , UINT16, void *));

/******************************************************************************/
/**
 * \fn		INT32 AddPMTServiceMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *													INT32 original_network_id,
 *													INT32 transport_stream_id,
 *													INT32 service_id,
 *													INT32 id_code,
 *													void (*callback) (INT32, INT32, void *))
 * \brief	Add PMT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddPMTServiceMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit, INT32 original_network_id,
						INT32 transport_stream_id,
						INT32 service_id,
						INT32 id_code,
						void (*callback) (INT32, INT32, UINT16, void *));

/******************************************************************************/
/**
 * \fn		INT32 AddServiceMonitoringListener(INT32 original_network_id,
 *											   INT32 transport_stream_id,
 *											   INT32 service_id,
 *											   INT32 id_code,
 *											   void (*callback)(void *))
 * \brief	Add SDT monitoring.
 *
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddServiceMonitoringListener(INT32 original_network_id,
										   INT32 transport_stream_id,
 										   INT32 service_id,
										   INT32 id_code,
										   void (*callback)(void *));

/******************************************************************************/
/**
 * \fn		INT32 AddServiceMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *													INT32 original_network_id,
 *													INT32 transport_stream_id,
 *													INT32 service_id,
 *													INT32 id_code,
 *													void (*callback)(void *))
 * \brief	Add SDT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddServiceMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 original_network_id,
					INT32 transport_stream_id,
					INT32 service_id, INT32 id_code, void (*callback) (void *));


/******************************************************************************/
/**
 * \fn		INT32 AddSDTOtherMonitoringListener(INT32 original_network_id,
 *											   INT32 transport_stream_id,
 *											   INT32 service_id,
 *											   INT32 id_code,
 *											   void (*callback)(void *))
 * \brief	Add SDT monitoring.
 *
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddSDTOtherMonitoringListener(INT32 original_network_id,
									INT32 transport_stream_id,
									INT32 service_id,
									INT32 id_code,
									void (*callback) (void *));

/******************************************************************************/
/**
 * \fn		INT32 AddSDTOtherMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *													INT32 original_network_id,
 *											   		INT32 transport_stream_id,
 *											   		INT32 service_id,
 *													INT32 id_code,
 *													void (*callback)(void *))
 * \brief	Add SDT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddSDTOtherMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 original_network_id,
					INT32 transport_stream_id,
					INT32 service_id,
					INT32 id_code,
					void (*callback) (void *));

/******************************************************************************/
/**
 * \fn		INT32 AddTDTMonitoringListener(INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add TDT monitoring.
 *
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddTDTMonitoringListener(INT32 id_code, void (*callback)(void *));

/******************************************************************************/
/**
 * \fn		INT32 AddTDTMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit, INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add TDT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddTDTMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code,
					void (*callback) (void *));

/******************************************************************************/
/**
 * \fn		INT32 AddTOTMonitoringListener(INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add TOT monitoring.
 *
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddTOTMonitoringListener(INT32 id_code, void (*callback)(void *));

/******************************************************************************/
/**
 * \fn		INT32 AddTOTMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit, INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add TOT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddTOTMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code,
					void (*callback) (void *));

/******************************************************************************/
/**
 * \fn		INT32 AddCATMonitoringListener(INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add CAT monitoring.
 *
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddCATMonitoringListener(INT32 id_code, void (*callback)(void *));

/******************************************************************************/
/**
 * \fn		INT32 AddCATMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,, INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add CAT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddCATMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code,
					void (*callback) (void *));

/******************************************************************************/
/**
 * \fn		INT32 AddPATMonitoringListener(INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add PAT monitoring.
 *
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddPATMonitoringListener(INT32 id_code, void (*callback)(void *));

/******************************************************************************/
/**
 * \fn		INT32 AddPATMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit, INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add PAT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddPATMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code,
					void (*callback)(void *));

#ifdef DVB_OTA_AUTO_DETECT//yc.guan 2010-04-15 add for SSU
/******************************************************************************/
/**
 * \fn		INT32 AddOtaPMTMonitoringListener(INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add OtaPMT monitoring.
 *
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddOtaPMTMonitoringListener(INT32 original_network_id,
									  INT32 transport_stream_id, INT32 service_id, INT32 id_code, void (*callback) (INT32, INT32, void *));

/******************************************************************************/
/**
 * \fn		INT32 AddDSIMonitoringListener(INT32 id_code, void (*callback)(void *))
 *
 * \brief	Add DSI monitoring.
 *
 * \param	id_code : identifier number
 * \param	callback : registered callback
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 AddDSIMonitoringListener(INT32 id_code, void (*callback)(void *));


#endif
/* @} end of addtogroup Add Monitors */


/** \addtogroup Remove_monitor	Remove Monitors
 *  \brief	remove monitors for tables
 * @{ */
/******************************************************************************/
/**
 * \fn		INT32 RemoveNetworkMonitoringListener(INT32 original_network_id,
 *											   	  INT32 transport_stream_id,
 *											      INT32 id_code)
 * \brief	Remove NIT monitoring.
 *
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveNetworkMonitoringListener(INT32 original_network_id,
												 INT32 transport_stream_id,
												 INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveNetworkMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *													INT32 original_network_id,
 *											   	  	INT32 transport_stream_id,
 *													INT32 id_code)
 * \brief	Remove NIT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveNetworkMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 network_id,
					INT32 transport_stream_id,
					INT32 id_code);
#ifdef CONFIG_SUPPORT_INDONESIA_EWS
/******************************************************************************/
/**
 * \fn		INT32 RemoveTxDWMonitoringListener(INT32 id_code)
 *
 * \brief	Remove TxDW monitoring.
 *
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveTxDWMonitoringListener(INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveTxDWMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit, INT32 id_code)
 *
 * \brief	Remove TxDW monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveTxDWMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code);
#endif

#ifdef CONFIG_SUPPORT_HBBTV
INT32 RemoveAITMonitoringListener(INT32 id_code);
INT32 RemoveAITMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code);
#endif

#ifdef CONFIG_SUPPORT_KDG_CERTIFICATION
/******************************************************************************/
/**
 * \fn		INT32 RemoveBouquetMonitoringListener(INT32 bouquet_id,
 *											   	  INT32 transport_stream_id,
 *											      INT32 id_code)
 * \brief	Remove BAT monitoring.
 *
 * \param	bouquet_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveBouquetMonitoringListener(INT32 bouquet_id,
												 INT32 transport_stream_id,
												 INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveBouquetMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *													INT32 bouquet_id,
 *											   	  	INT32 transport_stream_id,
 *													INT32 id_code)
 * \brief	Remove BAT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	bouquet_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveBouquetMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 bouquet_id,
					INT32 transport_stream_id,
					INT32 id_code);
#endif

/******************************************************************************/
/**
 * \fn		INT32 RemovePMTServiceMonitoringListener(INT32 original_network_id,
 *												  	 INT32 transport_stream_id,
 *												 	  INT32 service_id,
 *												 	  INT32 id_code)
 * \brief	Remove PMT monitoring.
 *
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemovePMTServiceMonitoringListener(INT32 original_network_id,
													 INT32 transport_stream_id,
													 INT32 service_id,
													 INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemovePMTServiceMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *														INT32 original_network_id,
 *												  	 	INT32 transport_stream_id,
 *												 	  	INT32 service_id,
 *												 	  	INT32 id_code)
 * \brief	Remove PMT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemovePMTServiceMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
						INT32 original_network_id,
						INT32 transport_stream_id,
						INT32 service_id,
						INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveServiceMonitoringListener(INT32 original_network_id,
 *											   INT32 transport_stream_id,
 *											   INT32 service_id,
 *											   INT32 id_code)
 * \brief	Remove SDT monitoring.
 *
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveServiceMonitoringListener(INT32 original_network_id,
											INT32 transport_stream_id,
											INT32 service_id,
											INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveServiceMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *													INT32 original_network_id,
 *													INT32 transport_stream_id,
 *													INT32 service_id,
 *													INT32 id_code)
 * \brief	Remove SDT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	original_network_id : network identifier
 * \param	transport_stream_id : transport identifier
 * \param	service_id : service number
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveServiceMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 original_network_id,
					INT32 transport_stream_id,
					INT32 service_id,
					INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveTDTMonitoringListener(INT32 id_code)
 *
 * \brief	Remove TDT monitoring.
 *
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveTDTMonitoringListener(INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveTDTMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
 *												INT32 id_code)
 *
 * \brief	Remove TDT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveTDTMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveTOTMonitoringListener(INT32 id_code)
 *
 * \brief	Remove TOT monitoring.
 *
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveTOTMonitoringListener(INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveTOTMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit, INT32 id_code)
 *
 * \brief	Remove TOT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveTOTMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveCATMonitoringListener(INT32 id_code)
 *
 * \brief	Remove CAT monitoring.
 *
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveCATMonitoringListener(INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemoveCATMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit, INT32 id_code)
 *
 * \brief	Remove CAT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveCATMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
					INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemovePATMonitoringListener(INT32 id_code)
 *
 * \brief	Remove PAT monitoring.
 *
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemovePATMonitoringListener(INT32 id_code);

/******************************************************************************/
/**
 * \fn		INT32 RemovePATMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit, INT32 id_code)
 *
 * \brief	Remove PAT monitoring.
 *
 * \param	InputUnit : Identify the demux unit
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemovePATMonitoringListenerEx(LIVE_INPUT_UNIT InputUnit,
									INT32 id_code);

#ifdef DVB_OTA_AUTO_DETECT//yc.guan 2010-04-15 add for SSU
/******************************************************************************/
/**
 * \fn		INT32 RemoveOtaPMTMonitoringListener(INT32 id_code)
 *
 * \brief	Remove OtaPMT monitoring.
 *
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveOtaPMTMonitoringListener(INT32 id_code);
/******************************************************************************/
/**
 * \fn		INT32 RemoveDSIMonitoringListener(INT32 id_code)
 *
 * \brief	Remove DSI monitoring.
 *
 * \param	id_code : identifier number
 *
 * \return	0 if success or fail if < 0
 *
 ******************************************************************************/
INT32 RemoveDSIMonitoringListener(INT32 id_code);

#endif

/* @} end of addtogroup Remove Monitors */


/** \addtogroup Initialize_monitors Initialize Monitors
 *  \brief	initialize and uninitialize
 * @{ */
 /******************************************************************************/
/**
 * \fn		DRV_Status_t MID_PsiMonInit(Mid_PsiMonCallbks_t *pstPsiMonCallbks)
 *
 * \brief	psi monitor initialization
 *
 * \param	pstPsiMonCallbks : Psi monitor callback structure
 *
 * \return	enum status
 *
 ******************************************************************************/
MID_Status_t MID_PsiMonInit(Mid_PsiMonCallbks_t *pstPsiMonCallbks);

/******************************************************************************/
/**
 * \fn		DRV_Status_t MID_PsiMonInitEx(LIVE_INPUT_UNIT InputUnit, Mid_PsiMonCallbks_t * pstPsiMonCallbks)
 *
 * \brief	psi monitor initialization
 *
 * \param	InputUnit : Identify the demux unit
 *
 * \param	pstPsiMonCallbks : Psi monitor callback structure
 *
 * \return	enum status
 *
 ******************************************************************************/
MID_Status_t MID_PsiMonInitEx(LIVE_INPUT_UNIT InputUnit, Mid_PsiMonCallbks_t * pstPsiMonCallbks);

/******************************************************************************/
/**
 * \fn		void MID_PsiMonUninit(void)
 *
 * \brief	psi monitor un-initialization
 *
 *
 * \return	none
 *
 ******************************************************************************/
void MID_PsiMonUninit(void);

/******************************************************************************/
/**
 * \fn		void MID_PsiMonUninitEx(LIVE_INPUT_UNIT InputUnit)
 *
 * \param	InputUnit : Identify the demux unit
 *
 * \brief	psi monitor un-initialization
 *
 *
 * \return	none
 *
 ******************************************************************************/
void MID_PsiMonUninitEx(LIVE_INPUT_UNIT InputUnit);

 /* @} end of addtogroup Initialize Monitors */


/** \addtogroup Monitor_operations Monitor Operations
 *  \brief	Operations for monitors
 * @{ */
/******************************************************************************/
/**
 * \fn		DRV_Status_t MID_PsiMonStart(void)
 *
 * \brief	psi monitor start
 *
 *
 * \return	enum status
 *
 ******************************************************************************/
MID_Status_t MID_PsiMonStart(void);

/******************************************************************************/
/**
 * \fn		DRV_Status_t MID_PsiMonStartEx(LIVE_INPUT_UNIT InputUnit)
 *
 * \param	InputUnit : Identify the demux unit
 *
 * \brief	psi monitor start
 *
 *
 * \return	enum status
 *
 ******************************************************************************/
MID_Status_t MID_PsiMonStartEx(LIVE_INPUT_UNIT InputUnit);

/******************************************************************************/
/**
 * \fn		DRV_Status_t MID_PsiMonStop(Boolean bExit)
 *
 * \brief	psi monitor stop
 *
 * \param	bExit: to idle or to exit mode
 *
 * \return	enum status
 *
 ******************************************************************************/
MID_Status_t MID_PsiMonStop(bool bExit);

/******************************************************************************/
/**
 * \fn		DRV_Status_t MID_PsiMonStopEx(LIVE_INPUT_UNIT InputUnit, Boolean bExit)
 *
 * \brief	psi monitor stop
 *
 * \param	InputUnit : Identify the demux unit
 *
 * \param	bExit: to idle or to exit mode
 *
 * \return	enum status
 *
 ******************************************************************************/
MID_Status_t MID_PsiMonStopEx(LIVE_INPUT_UNIT InputUnit, bool bExit);

/******************************************************************************/
/**
 * \fn		Boolean MID_PsiMonIsRunning(void)
 *
 * \brief	psi monitor stop
 *
 *
 * \return	TRUE for yes, FALSE for no
 *
 ******************************************************************************/
bool MID_PsiMonIsRunning(void);

/******************************************************************************/
/**
 * \fn		Boolean MID_PsiMonIsRunningEx(LIVE_INPUT_UNIT InputUnit)
 *
 * \param	InputUnit : Identify the demux unit
 *
 * \brief	psi monitor stop
 *
 *
 * \return	TRUE for yes, FALSE for no
 *
 ******************************************************************************/
bool MID_PsiMonIsRunningEx(LIVE_INPUT_UNIT InputUnit);

/******************************************************************************/
/**
 * \fn		DRV_Status_t MID_PsiMonNotifyProgChanged(UINT32 hProg)
 *
 * \brief	psi monitor signal program change
 *
 * \param	hProg : the new program handle
 *
 * \return	enum status
 *
 ******************************************************************************/
MID_Status_t MID_PsiMonNotifyProgChanged(UINT32 hProg);

/******************************************************************************/
/**
 * \fn		DRV_Status_t MID_PsiMonNotifyProgChangedEx(LIVE_INPUT_UNIT InputUnit, UINT32 u32Prog)
 *
 * \brief	psi monitor signal program change
 *
 * \param	InputUnit : Identify the demux unit
 *
 * \param	u32Prog: the new program handle
 *
 * \return	enum status
 *
 ******************************************************************************/
MID_Status_t MID_PsiMonNotifyProgChangedEx(LIVE_INPUT_UNIT InputUnit, UINT32 u32Prog);

/******************************************************************************/
/**
 * \fn		UINT32 MID_PsiMonQueryCurrentProgHdl(void)
 *
 * \brief	to query current psi listening program handle
 *
 *
 * \return	current listening program handle
 *
 ******************************************************************************/
UINT32 MID_PsiMonQueryCurrentProgHdl(void) ;

/******************************************************************************/
/**
 * \fn		UINT32 MID_PsiMonQueryCurrentProgHdlEx(LIVE_INPUT_UNIT InputUnit)
 *
 * \brief	to query current psi listening program handle
 *
 *
 * \return	current listening program handle
 *
 ******************************************************************************/
UINT32 MID_PsiMonQueryCurrentProgHdlEx(LIVE_INPUT_UNIT InputUnit);
 /* @} end of addtogroup Monitor Operations */

#ifdef CONFIG_SUPPORT_INDONESIA_EWS
 void MID_PsiMonSetEwsPid(UINT16 pid);
#endif
/* @} end of addtogroup Monitors */
#ifdef SUPPORT_INDEPENDENCE_DETECT_OTA
void MID_PsiMonSetPmtFlag(Boolean bFlag);
bool MID_PsiMonGetPmtFlag(void);
#endif
#endif	// #ifndef _MONITOR_H_2008_04_17