123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231 |
- /********************************** (C) COPYRIGHT *******************************
- * File Name : ch32v30x_spi.h
- * Author : WCH
- * Version : V1.0.0
- * Date : 2021/06/06
- * Description : This file contains all the functions prototypes for the
- * SPI firmware library.
- *********************************************************************************
- * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
- * Attention: This software (modified or not) and binary are used for
- * microcontroller manufactured by Nanjing Qinheng Microelectronics.
- *******************************************************************************/
- #ifndef __CH32V30x_SPI_H
- #define __CH32V30x_SPI_H
- #ifdef __cplusplus
- extern "C" {
- #endif
- #include "ch32v30x.h"
- /* SPI Init structure definition */
- typedef struct
- {
- uint16_t SPI_Direction; /* Specifies the SPI unidirectional or bidirectional data mode.
- This parameter can be a value of @ref SPI_data_direction */
- uint16_t SPI_Mode; /* Specifies the SPI operating mode.
- This parameter can be a value of @ref SPI_mode */
- uint16_t SPI_DataSize; /* Specifies the SPI data size.
- This parameter can be a value of @ref SPI_data_size */
- uint16_t SPI_CPOL; /* Specifies the serial clock steady state.
- This parameter can be a value of @ref SPI_Clock_Polarity */
- uint16_t SPI_CPHA; /* Specifies the clock active edge for the bit capture.
- This parameter can be a value of @ref SPI_Clock_Phase */
- uint16_t SPI_NSS; /* Specifies whether the NSS signal is managed by
- hardware (NSS pin) or by software using the SSI bit.
- This parameter can be a value of @ref SPI_Slave_Select_management */
-
- uint16_t SPI_BaudRatePrescaler; /* Specifies the Baud Rate prescaler value which will be
- used to configure the transmit and receive SCK clock.
- This parameter can be a value of @ref SPI_BaudRate_Prescaler.
- @note The communication clock is derived from the master
- clock. The slave clock does not need to be set. */
- uint16_t SPI_FirstBit; /* Specifies whether data transfers start from MSB or LSB bit.
- This parameter can be a value of @ref SPI_MSB_LSB_transmission */
- uint16_t SPI_CRCPolynomial; /* Specifies the polynomial used for the CRC calculation. */
- }SPI_InitTypeDef;
- /* I2S Init structure definition */
- typedef struct
- {
- uint16_t I2S_Mode; /* Specifies the I2S operating mode.
- This parameter can be a value of @ref I2S_Mode */
- uint16_t I2S_Standard; /* Specifies the standard used for the I2S communication.
- This parameter can be a value of @ref I2S_Standard */
- uint16_t I2S_DataFormat; /* Specifies the data format for the I2S communication.
- This parameter can be a value of @ref I2S_Data_Format */
- uint16_t I2S_MCLKOutput; /* Specifies whether the I2S MCLK output is enabled or not.
- This parameter can be a value of @ref I2S_MCLK_Output */
- uint32_t I2S_AudioFreq; /* Specifies the frequency selected for the I2S communication.
- This parameter can be a value of @ref I2S_Audio_Frequency */
- uint16_t I2S_CPOL; /* Specifies the idle state of the I2S clock.
- This parameter can be a value of @ref I2S_Clock_Polarity */
- }I2S_InitTypeDef;
- /* SPI_data_direction */
- #define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000)
- #define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400)
- #define SPI_Direction_1Line_Rx ((uint16_t)0x8000)
- #define SPI_Direction_1Line_Tx ((uint16_t)0xC000)
- /* SPI_mode */
- #define SPI_Mode_Master ((uint16_t)0x0104)
- #define SPI_Mode_Slave ((uint16_t)0x0000)
- /* SPI_data_size */
- #define SPI_DataSize_16b ((uint16_t)0x0800)
- #define SPI_DataSize_8b ((uint16_t)0x0000)
- /* SPI_Clock_Polarity */
- #define SPI_CPOL_Low ((uint16_t)0x0000)
- #define SPI_CPOL_High ((uint16_t)0x0002)
- /* SPI_Clock_Phase */
- #define SPI_CPHA_1Edge ((uint16_t)0x0000)
- #define SPI_CPHA_2Edge ((uint16_t)0x0001)
- /* SPI_Slave_Select_management */
- #define SPI_NSS_Soft ((uint16_t)0x0200)
- #define SPI_NSS_Hard ((uint16_t)0x0000)
- /* SPI_BaudRate_Prescaler */
- #define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000)
- #define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008)
- #define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010)
- #define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018)
- #define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020)
- #define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028)
- #define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030)
- #define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038)
- /* SPI_MSB_LSB_transmission */
- #define SPI_FirstBit_MSB ((uint16_t)0x0000)
- #define SPI_FirstBit_LSB ((uint16_t)0x0080)
- /* I2S_Mode */
- #define I2S_Mode_SlaveTx ((uint16_t)0x0000)
- #define I2S_Mode_SlaveRx ((uint16_t)0x0100)
- #define I2S_Mode_MasterTx ((uint16_t)0x0200)
- #define I2S_Mode_MasterRx ((uint16_t)0x0300)
- /* I2S_Standard */
- #define I2S_Standard_Phillips ((uint16_t)0x0000)
- #define I2S_Standard_MSB ((uint16_t)0x0010)
- #define I2S_Standard_LSB ((uint16_t)0x0020)
- #define I2S_Standard_PCMShort ((uint16_t)0x0030)
- #define I2S_Standard_PCMLong ((uint16_t)0x00B0)
- /* I2S_Data_Format */
- #define I2S_DataFormat_16b ((uint16_t)0x0000)
- #define I2S_DataFormat_16bextended ((uint16_t)0x0001)
- #define I2S_DataFormat_24b ((uint16_t)0x0003)
- #define I2S_DataFormat_32b ((uint16_t)0x0005)
- /* I2S_MCLK_Output */
- #define I2S_MCLKOutput_Enable ((uint16_t)0x0200)
- #define I2S_MCLKOutput_Disable ((uint16_t)0x0000)
- /* I2S_Audio_Frequency */
- #define I2S_AudioFreq_192k ((uint32_t)192000)
- #define I2S_AudioFreq_96k ((uint32_t)96000)
- #define I2S_AudioFreq_48k ((uint32_t)48000)
- #define I2S_AudioFreq_44k ((uint32_t)44100)
- #define I2S_AudioFreq_32k ((uint32_t)32000)
- #define I2S_AudioFreq_22k ((uint32_t)22050)
- #define I2S_AudioFreq_16k ((uint32_t)16000)
- #define I2S_AudioFreq_11k ((uint32_t)11025)
- #define I2S_AudioFreq_8k ((uint32_t)8000)
- #define I2S_AudioFreq_Default ((uint32_t)2)
- /* I2S_Clock_Polarity */
- #define I2S_CPOL_Low ((uint16_t)0x0000)
- #define I2S_CPOL_High ((uint16_t)0x0008)
- /* SPI_I2S_DMA_transfer_requests */
- #define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002)
- #define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001)
- /* SPI_NSS_internal_software_management */
- #define SPI_NSSInternalSoft_Set ((uint16_t)0x0100)
- #define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF)
- /* SPI_CRC_Transmit_Receive */
- #define SPI_CRC_Tx ((uint8_t)0x00)
- #define SPI_CRC_Rx ((uint8_t)0x01)
- /* SPI_direction_transmit_receive */
- #define SPI_Direction_Rx ((uint16_t)0xBFFF)
- #define SPI_Direction_Tx ((uint16_t)0x4000)
- /* SPI_I2S_interrupts_definition */
- #define SPI_I2S_IT_TXE ((uint8_t)0x71)
- #define SPI_I2S_IT_RXNE ((uint8_t)0x60)
- #define SPI_I2S_IT_ERR ((uint8_t)0x50)
- #define SPI_I2S_IT_OVR ((uint8_t)0x56)
- #define SPI_IT_MODF ((uint8_t)0x55)
- #define SPI_IT_CRCERR ((uint8_t)0x54)
- #define I2S_IT_UDR ((uint8_t)0x53)
- /* SPI_I2S_flags_definition */
- #define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001)
- #define SPI_I2S_FLAG_TXE ((uint16_t)0x0002)
- #define I2S_FLAG_CHSIDE ((uint16_t)0x0004)
- #define I2S_FLAG_UDR ((uint16_t)0x0008)
- #define SPI_FLAG_CRCERR ((uint16_t)0x0010)
- #define SPI_FLAG_MODF ((uint16_t)0x0020)
- #define SPI_I2S_FLAG_OVR ((uint16_t)0x0040)
- #define SPI_I2S_FLAG_BSY ((uint16_t)0x0080)
- void SPI_I2S_DeInit(SPI_TypeDef* SPIx);
- void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct);
- void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct);
- void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct);
- void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct);
- void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
- void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
- void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState);
- void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState);
- void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data);
- uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx);
- void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft);
- void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState);
- void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize);
- void SPI_TransmitCRC(SPI_TypeDef* SPIx);
- void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState);
- uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC);
- uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx);
- void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction);
- FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
- void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
- ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
- void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
- #ifdef __cplusplus
- }
- #endif
- #endif
|